QUOTE(Iceman74 @ Nov 9 2018, 03:52 PM)
If you want to install water pump, make sure your piping is all ok or replace with new one to withstand the pressure. If not, later bocor everywhere also cannot see, leaving watermark all over the place.
you can direct lay new water pipe to your bathroom just for showering with the rest untouched since you are DS.
Q:
1. Which water pump to choose if i want to boost up my water pressure and have nice strong shower?
me chose GRUNDFOS. Model no you can ask those seller introduce
2. Which brand offers sufficient warranty? pls share your testimony if any....
GRUNDFOS so far ok, more than 2 years now
3. Water pump is to be installed next to the water tank rite up in the roof? why i see some ppl ask if the water pump can be place infront of the house?
Me install next to my water tank. Nobody will installed next to water meter(me forgot why and i think can get in trouble with syabas) I believe it is wrong way to do it and create low pressure for other house when you using it.
4. Which horse power or ww is sufficient for DS link house?
normally depending how many bathroom/water tap need
5. Any installer contact to share?
My installer from kepong. U can search those qualify dealer around your place first
For the no 3, thats not the reason. The real reason is the pump will be damaged if you run it dry. Hence you can see some of these when choosing pump brand "dry run protection". So the pump suction should be installed in airtight connection. Which mean it need to pump by sucking the water from abundant source.
If you directly installed it from water meter, lets say the syabas source is kinda slow and your pump need more than it could supply, the pump will be running dry. The component inside the pump such as mechanical seal will be damaged and this gonna cause leak.
As for where to install it you need to check the pump manual. It will show you the maximum length of the suction from the ground level. Thats if you wanted to install it on the 2nd floor. Same with discharge, there is a maximum range. Just in case, make sure you tell your installer to do the bypass valve in your piping system. Lets say if you temporarily have no electricity, you can bypass the system, low pressure water, but hey at least you can use it.