Hi,

I am thinking to switch from Maxis 10Mbps to Unifi 100Mbps.

May I know the procedure?

And whether the Unifi is stable?

My current Maxis is ride on TM infra, so far there is no problem from the beginning.

Thank you.

May I know what is the router that Unifi will provide for 100Mbps package?

And the Dect phone is still available?

Thank you.

Hi,

Want to ask something on the Unifi 100Mbps package.

I am Maxis Broadband user previously. I went to TM point at Quill City Mall to apply for this package.

However, the officer said that the Hypp TV setup box is not included, if I want it, I have to add RM 30 per month. The Unifi TV channel provided in this package only can view via Apps.


May I know whether is it true?


Thank you.

Dear All,

may I know the Unifi Setup Box for Hypp TV can connect to either 1 of the Lan port from the router?

Thank you.

Can I connect in such as a way like

from router port 3 to another network switch

then I connect this network switch with a AP and the setup box for internet and TV usage?

Thanks a lot.

Seems a good idea but don't know how to setup it here.

the Smart Network Switch cost how much?

Please do update us the status once you got it.... haha.... thanks in advance.

btw, if using the router provided by TM, whether can merge the 2 nos. of the VLAN port?

Bro, that is great.... but why cannot set to 1000Mbps?

Thank you.

Anyone can recommend cheap and reliable router which is having VPN server features?

TM installed mine with Dlink 842 router which don't have this features.

Thinking to get another 1 to replace.

Thank you.

I am using Aztech HL119EP, it is stable can cater for 100Mbps in my house if using LAN cable connection.

Most of the time, it is connected to my upstair Asus RT-N14UHP, due to it is only 2.4g wifi connection, so the speed around 40Mbps only.

May I know why disable the IPv6 can make it work?
Because I also noticed that loading youtube is slower (Unifi 100Mbps) compare to Maxis Home Fibre (my previous package is only 10Mbps).

Thank you.

May I know how to disable my DIR-842 HW:C2 FW:3.01TM IPv6?
It is current show :-

Connection Type: Local Connectivity Only

WAN IPv6 Address: Not Available


Default Gateway: Not Available


Thank you.

Thanks.
Actually, my house setup is like below:-
1. Ground Floor: TM Modem + TM Router (Dlink 842) + Home Plug( Aztech HL119EP)

2. First Floor: Home Plug (Aztech HL119EP)+Asus RT-N14UHP (Set as AP mode) (tested with cable connection, PC can get 100Mbps)


I have tried again. If I connect to Dlink 842 directly (2.4g / 5g) to load the youtube, it has no problem to load the Youtube.

But when I connect to the Asus router (2.4g), then my handphone and my wife handphone is very slow to load the youtube, however, if PC connect to asus rounter (2.4g), PC has no problem to load the youtube.


But I have no problem last time when I use Maxis router Tricolor, eventhough it is only 10Mbps.


May I know what is the problem actually?


Thank you.

Yup, same setting and setup connection like using Maxis Home Fibre previously, but has no problem with Maxis.

Just after switch to Unifi then problem started.

May I know whether I can use Cisco RV130 VPN router connect to the TM BTU for getting the Internet and setup the VPN server?


Then use the existing Dlink DIR842 router as a AP with connecting to the Cisco RV130.


Thank you.

Hi,

May I know that whether I can set the Dlink DIR842 port no.4 to internet instead of IPTV by default, because the RM129 package does not come with the Hypp TV box, so no device to connect for Hypp TV.

Thank you.