I need some help for the item below.



It fit the speaker size 6.5" but the problem is does not fit the bezza door speaker frame. Too big

Do i need additional adapter like below to fit it.

https://shopee.com.my/2X-6.5-Horn-Speaker-A...3075.1533778070

This post has been edited by DEz012: Jan 4 2020, 06:04 PM

Double check the car front bonnet, the car will beep and cant lock if front bonnet not lock properly.

Hi, guys,

Is the Head LED lamp below reliable ?

https://shopee.com.my/C6-LED-6000k-4300k-H4...Wira-myvi-1pair

The USB stick must be partition style in MBR and FAT32.

If the partition style is GPT and FAT32 the player will display Error when plug in.

Please read the car manual book page 7-9 for playing notes of support files format and bit rates and max display characters.

The player can only read max 255 files per folder, so do not put all your mp3 on the usb stick main folder or else it will not read all files.

U need to separate each folder with 255 files until u max up the usb capacity. U can name the folders 1,2,3.

This post has been edited by DEz012: Sep 18 2022, 11:39 AM

Where is the Bezza Headlight Relay located ?

My Bezza having weird issue with the brake light won't off after on, even when i off the engine. I have change the switch stop lamp with new one by the brake pedal but issue still persist.
I'm very sure the switch button is fully press by the pedal. The only way for it to off is to unplug the wire from the switch.

I have used a multi meter to test the switch 4 connection point for both new and old switch with both working same. The old switch button spring is still very firm, work same as the new one.



Connection Point 1 & 2 got current and 3 & 4 no current when switch press.
Connection Point 3 & 4 got current and 1 & 2 no current when switch release.

I'm not sure above is the correct working way for the switch, since the problem persist.

Bezza 1.3 , Push start button.

Yes as long the light is on will start. Lights off wont start.

The serious problem is when i'm driving the car on road people driving behind me keep seeing the brake light on all the time.

The car is also not accelerate smooth when climbing hill felt abit jerking when the brake light in on when driving. I feel the Car ECU or ECM is detecting the the braking causing the car not accelerate smoothly.
If the brake light is not on the car drive no issue.

The crazy part is if i'm driving the car on road in slow moving motion and i disconnect and reconnect the switch stop cable the gas peddle will lost acceleration for a few second.

Not the switch position issue as i have fully push it down to the max point & the button is fully press all the way with no gap when brake pedal not step. I even try using my finger pressing the button still the brake light on.

This post has been edited by DEz012: Oct 16 2023, 11:55 PM

I'm having the issue same as the video below.

https://www.youtube.com/watch?v=IhsKaI0ZMfQ

The car was able to start normal this afternoon but later at night this issue happens.

Car battery was change new at 2021 and i have a battery charger charging it full still won't start.

Car fuel is at 6 bar.

Is this cause by the fuel filter clog or pump spoil as my car is coming 7 years never change it ? I can hear the fuel pump noise when ac on.

I did read the comment One said need to pump fuel, one said code reset, one said parking lock. I'm .

I only can try start the car about 4 times before EPS yellow light on & can smell fuel so i don't know what is the issue. So tomorrow better call SC.

I don't think the key issue tested using spare also same. The engine sputtering when trying to start, so no choice need towing.

The brake switch on the brake pedal is faulty, u can change it yourself. Just buy from Perodua Service Center never buy from shopee or lazada most seller are selling faulty ones.