Bridgestone is ecopia.
Depends on the batch ler..
At 2016, u're looking to change soon cos of the year of make of the tire.
Cant keep the tire too long cos of rubber degradation.

Yup its an automatic.

Im not sure so im i cant give you an accurate figure.should be floating around 3.5k-4k because i like to rev the engine abit (hehe)..

No , i just hope that when we go thru " normal " malaysia road when during heavy rain , the water wont go into the cabin.

if it will drain out / dry out very fast or only very minimal still ok , i scare rust and cant see.

maybe it does not matter even rust , i just here to learn haha.

so that if i got chance to upgrade to better car , i know which car to choose.

after some research on how these drain way work , wonder those who do AutoFoam on chassis will create problem or not.

Okok.
That sounds about right for the 1.0 gearing.
Thanks for the info man.!

are you planning to get one?

anybody know the waiting period for gxtra now?

Yes, based on my own experience.. happy modding... Cheers..

Bezza... Rally car?... That will be...... You decide...😁

got my car today, waiting time was 2 month

Mabbe the axia for my son.
See how he perform in helping out in the house..
Lol

Lol...
Auto some more..
Apek like me doing the leisure rally.
Heh

there will be a rubber plug wherever the hole really penetrates into the cabin, i mean if the hole is piercing through until the cabin interior during manufacturing, it could be by design or some other purposes. So long the rubber plug is intact, water won't go in.

And whole car body shelf is soak into a pool of chemical for rust proofing purpose, under normal circumstances, it won't rust for like 10 years (a car design lifetime). Unless you run through a pool of salt water or other corrosive liquids then it wil be different story.

the new proton saga NVH is better than bezza by many miles i believe. haven't sit into one. but i do felt that bezza NVH is just a tat better than old proton saga BLM/FL/FLX, still the hollow insulation minus out the engine noise (the engine itself is quite refine so long you driving it gently, it still roars and noise intrusion still happens if you whack it pass 4000rpm)

if you really into driving pleasure, go get a mazda. should be the cheapest refined driving cars around.

Ok , then maybe the water go in from the gap of plastic by passenger shoes , maybe will put some newspaper into the plastic , more test needed during rain

Bezza engine really refine
But if sedan is not needed , myvi /Iriz is better , persona 1.6 might be too much to be economical

Proton quality still not there , if electrical problem still ok but proton more like mechanical problem which wear out faster than it should be , if replacement can fix still ok , certain car the solution is change part way frequent than it should. It is a much fun car than perodua.

i need to change 2 tyre. Tire shop recommended Silverstone NS800 Kruzer. IS it a good tire? or better take continental CC6? I prefer silent tire. Btw i saw in lazada and shoppe, online tire shop charging RM123/unit for CC6. Is it trustworthy or later when install will need pay this and pay that?

This post has been edited by kratosgrab: Jun 27 2019, 10:47 AM

i think CC6 and XM2 or XM2+ , is good for this price range. this 2 will be my choice next

heard xm2 is very durable , heard can last 100k mileage

cc6 is super silent ( or most silent and comfort among these ) , but easier to have puncture and less grip at corner , more to comfort side.

this is what i " heard "

CC6 can get quite good price on lazada , but not sure how long these tyre has been keep.

or maybe those plugs came loose, it is possible, so check it out. if passenger shoes only it shouldn't be really wet.

yeah, hatch will be fun to drive, a tat more nimble.

proton, i personally think that they are picking up at least from where they are, while for perodua, i think that they are falling back or remain from where they are. i'm talking about quality wise. Build quality, part quality etc.

anyone install mudguard? recommendation?

When I change 2 new tire front. After allignment check, shop say need change a camber nut. Is it necessary or the shop try to ketuk me. RM40 per nut. How?

Oldest con job been around since don't know when...

This post has been edited by Ciypher: Jul 1 2019, 09:05 PM

Better safe some money. If the machine shows you are in the red. It is time to check you bush and absorber. Those nut is a temporary solution for an illness. Unless you had a major accident before where your wheel arch change geometry. It is a sham.

If wheel arch change geometry meaning it is not allignment problem? Will my new replace tire get eroded easily? What shall I do?