cpuz show 1.376v right?

got other software make sure ?

Really high and really scared d.
I couldn't prime even at that high.. Is that becoz of the CPU or the mobo or other items limitation?
Btw, any tips to reach that speed @1.475v Thx..

Depend on your hardware batch actually.
Some can achieve with low Vcore, some high Vcore.
Limitation? It might be both or one of them


-pWs-

i'm using default voltage..in bios it is at 1.35..previously using the old bios, can only get to 2.5ghz on default..now, after flashing to the latest bios from rebel haven, finally manage in getting 2.6...to get 2.7, too much to pump, 1.4v to stable and pass orthos..

2.5 windsor 3800 with just default voltage? that's nice...
mine last time.. 2.7 i need 1.5 like that.. maybe some setting not right and bios not very good..

Yes... Windsor with default voltage can achieve 2.5GHz indeed a very good result.
Last time, I using Windsor when achieve 2.5GHz, already pump quite a lot of Vcore.


-pWs-

indeed it is..
my previous Windsor require 1.475v to achieve 2.5GHz
thus, the temperature was quite high..

============================================

guys, after i flashed my BIOS to R69AM605.BST, the results disappoint me
i cant even went to 2.5GHz (263MHz), which i already achieved it easily with the previous BIOS version..
the setup will hang at the boot screen, and suddenly it restarted..
any idea whats wrong here?

This post has been edited by kalakatu: Jul 21 2007, 07:44 AM

Try different RAM settings .. Using 1T or 2T?? .. I get past 3GHZ with ease running on 605 bios .. See my sig ..

This post has been edited by Worm77: Jul 21 2007, 08:55 AM

I think you missed something. Probably the 2T thing, or anything. 605 bios is great, I don't think it limits down the fsb

no i didnt..if i still using the 1T setting, of course the beep sound will be heard, or my pc will went to blank screen..
but my problem is it will automatically restarted at boot screen, even when i use the same setting like before with my previous bios..
now achieving only 2.5GHz is so hard to do

anyway how about the other setting like spread spectrum and anything else? im afraid i 'ignored' them..

Spread spectrum? I have no idea what is that

Really achieving 2.5GHz so hard? To me I achieve 2.8GHz easily using that same BIOS. I don't know what went wrong

need some adjustment ar....
try to tweak it more.....

and also depends on the proc batch also....

Try disabling spread spectrum. I did it on mine.

Just try to OC with new mobo biostar TF-7050, able to hit 3.2GHz easily

cpu-z validation page: http://valid.x86-secret.com/show_oc.php?id=219196



Attached thumbnail(s)

Here is mine:

AMD Athlon 64 X2 3600+ Brisbane @ 3002Mhz
BIOSTAR TA690G-AM2
GSKILL F2-6400CL4D-2GBPK @ 1000Mhz 5-5-5-15
COOLERMASTER GeminII

Passed OCCT, 3DMark06, and dual SuperPI 32M

This post has been edited by dreaming: Jul 21 2007, 06:15 PM

Dem, how come can get easily 3ghz andd 3.2ghz while i'm still struggling maybe i'll try to push harder once i'm free

How about Vcore? Got any difference?
And can u use 667MHz divider when u achieve 3GHz which cannot be done with your previous board?


-pWs-

hi , vcore has no problem .. i've tried to raise the vcore to 1.71v for testing purpose, no problem at all. Ya this board don't have the" memory divider bug",u can see from the screenshot, i'm using 667 divider

Problems are:

1) clockgen is not supported yet
2) max vdimm 2.44v only
3) safe mode as sensitive as usual

the rest yet to be discovered....

This post has been edited by dblooi: Jul 21 2007, 09:07 PM

wow quite good core u have man...
my proc nids 1.475 to reach 2.5ghz...

Walau! Just bought 2 biostar 7050 with 3800 x2 last week for media PC.
I didn't realise that it's easily overclockable.