i think is DFI with its crazy HTT (>400MHz)

to me , highly OCable HT link is more insane

for daily use, u use high HT link as well?

for daily use, everything in default mode
CnQ on somemore
need to save electricity ar

how bout the AM2 board 6 series??
any opinion form its user?

wakaka.. funny .. i thought hardcore oc like u will stick at 3.0ghz for daily use.. me, oc when wanna playing games.. then default it back.. .. my mom will get angry if bill melambung..haha

Guys what about Gigabyte GA 590 Sli S5,izit good for overclocking..?im using it rite now..

My Biostar mobo died for no reason, bad timing too, during raya! Anyone experienced this before? I'm not fully overclocked it too, just run it at 2.2GHz. The PSU is fine, I tested it on other PC. Just the mobo won't start...I hope the RMA process at Viewnet ain't painful..

@xixo_12

hav u oced ur F3 ah?

bro, wait la, baru je sampai nie ha.. lom bukak lagi, have to check the condition first...

@dblooi
item received..

@sempronic..
wait k, have prob with CIMB connection on9..
will inform u later

i jz received too...
i got the 3157 proc...

at stock, vcore=1.18V


i can oni push it till here at stock vcore...

oic... in this case
it is caused by voltage drop
suppose stock voltage is 1.21vcore for ur proc
try to add some vcore and see

This post has been edited by dblooi: Oct 17 2007, 01:15 PM

it's time for me to show off what i got..

1st setting~

HT link= 600Mhz
Bus Speed= increment 15Mhz (testing for 1024K FFT length)
HSF= stock
Temperature=showing at pic
Vcore= +0.037 (1.22v)
Ram timing=5-5-5-15-2T (single channel)

my target is low vcore with high speed:
showing u wut i got as below

#1
[attachmentid=312058]

another setting have to wait other cooling arrived..
sadly the temperature 55c for load

conclusion..
wut the nice proc.. even with lower vcore manage to hit 3ghz..
im fallen in love with this proc..

huhuh

nice try~~ using stock vcore ~~ hehe try how high stock vcore can go

Just receive Crucial 10th. Now oc lor

-pWs-

good luck to u bro~~

let rock N roll using DFI + crusial

something wrong with the temp
try to touch ur HSF and see
CZ suppose to be the coolest am2 proc

stock vcore, 1.21V

as shown on the tag 3157Mhz

@dblooi

weird about temp, HSF rosak kot haha..

anywhere, tis is the last oc i can show, another oc with this powerful proc will come later

[attachmentid=312087]

setup discussion..

only after adding vcore +0.050, my rig will stable and the temp like hell..
so decided to stop there..
playing tis proc later..

This post has been edited by xixo_12: Oct 17 2007, 02:54 PM