Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
7 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 AMDŽ Socket-AM2 Overclocking thread (V2), discuss our setup/overclocking issues

views
     
xixo_12
post Aug 30 2007, 08:18 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
found edi n updated ........ hold at 300x9.5 n still push.....1.38v vcore...2.05v vdimmm 4-5-5-15 divider533

This post has been edited by xixo_12: Aug 30 2007, 08:23 AM
xixo_12
post Aug 30 2007, 06:04 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
now my vcore 1.44, vdim 2.15... but orthos fail at 307x9.5, superpi 32M pass oso 1M... do i need add vcore?? temp stil 42C full load... afraid.. haha tongue.gif

Added on August 30, 2007, 6:20 pmsetting at 1.53vcore and 315x9.5 fail..
stil testing at 310x9.5

Added on August 30, 2007, 7:21 pmcmos reset edi... haha... tired laugh.gif

This post has been edited by xixo_12: Aug 30 2007, 07:21 PM
xixo_12
post Aug 31 2007, 12:52 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(-pWs- @ Aug 30 2007, 10:05 PM)
1.53Vcore failed at 315 x 9.5 ??? A bit too high Vcore IMO.
How about your ram frequency n timing? It might due to ram as well.

-pWs-
*
this is before..
then freeze..
[attachmentid=286905]
[attachmentid=286906]
[attachmentid=286908]

after cmos reset.. i stay at this
[attachmentid=286910]

i think coz of ram.. just using VS corsair.. wakaka thumbup.gif

This post has been edited by xixo_12: Aug 31 2007, 12:53 AM
xixo_12
post Aug 31 2007, 01:07 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
easy to find at kl.. hard to find in malacca :sad:
xixo_12
post Aug 31 2007, 11:17 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(-pWs- @ Aug 31 2007, 01:28 AM)
Lower down the ram divider and overclock again. Use 400MHz divider.
Timing make it 5-5-5-18. smile.gif
3800 F3 hard to find.
Others model very easy to find i guess

-pWs-
*
ok will try..about vdimm .. set at 2.15v can??

Added on August 31, 2007, 11:20 ami want change ram 1gb from 667 vs corsair to 2x512 micron D9GKx ddr800.. worth or not??

This post has been edited by xixo_12: Aug 31 2007, 11:20 AM
xixo_12
post Aug 31 2007, 11:23 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE
i want change ram 1gb from 667 vs corsair to 2x512 micron D9GKx ddr800.. worth or not??
*
can answer this?? price expected??

This post has been edited by xixo_12: Aug 31 2007, 11:32 AM
xixo_12
post Aug 31 2007, 05:09 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
[QUOTE][quote=-pWs-,Aug 31 2007, 01:28 AM][/QUOTE]
Lower down the ram divider and overclock again. Use 400MHz divider.
Timing make it 5-5-5-18. smile.gif
[QUOTE]

270x9.5.. won't boot.. cry.gif .. i think better to get new 1gb pair.. smile.gif bu no money edi doh.gif
xixo_12
post Sep 1 2007, 11:48 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(-pWs- @ Aug 31 2007, 06:31 PM)
Haha..Get Crucial  icon_rolleyes.gif
Mind to attach CPU-z screenie?

-pWs-
*
get crucial blink.gif ..my poket will rabak.. brows.gif
maybe in disember..

still testing 5-5-5-15 using ddr400.. low bandwith.. 3 ghz mission using VS corsair ..wakaka flex.gif

This post has been edited by xixo_12: Sep 1 2007, 11:49 AM
xixo_12
post Sep 1 2007, 06:38 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(-pWs- @ Sep 1 2007, 12:42 PM)
Congrat.. Since slow ram frequency, try to tight the timing. smile.gif

-pWs-
*
u mean?? can giv one timing.. tired alredi..haha sweat.gif
xixo_12
post Sep 1 2007, 06:56 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(-pWs- @ Sep 1 2007, 06:52 PM)
Let say 4-4-4-12. May need some extra vdimm. smile.gif
I thought that function is CnQ. Even in Windows XP, we also manage to use that function.

-pWs-
*
will try... thx
xixo_12
post Sep 4 2007, 08:13 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
3600+ X2 Brisbane G1 | Xixo_12 | Biostar TA690G | 1GB VS Corsair | BUFFALO l 2916MHZ

stay at here now.. before cacat to oc again.. biggrin.gif
[attachmentid=289096]
xixo_12
post Sep 5 2007, 02:09 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(nik0ns @ Sep 5 2007, 01:49 AM)
my first overclock... biggrin.gif

any comments/suggestions??

amd64 3200+,biostar tf550,2*1 gig mushkin ddr2 800
*
how about temp?? can push higher?? brows.gif
xixo_12
post Sep 5 2007, 02:50 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(nik0ns @ Sep 5 2007, 02:20 AM)
temp is ok ...around 45 at load using the old skool thermaltake venus
cant push higher,even with 1.475 v
it will boot but fail prime95
mybe my ram cant go higher  hmm.gif
need opinion from lyn overclocking master  biggrin.gif
*
try to set 4-5-5-15 and ddr533.. push again..
xixo_12
post Sep 6 2007, 08:39 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
brisbane 4.0.. i want it too

~xixo_12~ icon_rolleyes.gif
xixo_12
post Sep 7 2007, 07:38 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
forever with amd... nice proc and superb rclxms.gif

~xixo_12~ icon_rolleyes.gif
xixo_12
post Sep 8 2007, 11:59 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(slash @ Sep 7 2007, 09:32 PM)
Here's mine.
*
bro it can push higher??
i think it will reach limit and u cant get 3ghz rite??
xixo_12
post Sep 8 2007, 12:11 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(sempronic @ Sep 8 2007, 12:08 PM)
if not try u would never know....
proc after some time burn in....
it can go more higher then usual....
*
want advise.
higher vcore that can set for brisby?

~xixo_12~
icon_rolleyes.gif
xixo_12
post Sep 8 2007, 08:31 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(slash @ Sep 8 2007, 05:38 PM)
Yeah, 3ghz fail orthos. So close to 3ghz, haha. Will try 1.425 or 1.45v next time.
No time to test cause need to use pc for assignments.
*
haha.. told alredi.. same like me, a lot asinment to do.. lazy to othos.. better i do my asinment than looking at the GO..GO..GO.> and then STOPPING.. frust cry.gif ...

Added on September 8, 2007, 8:33 pm
QUOTE(capriodimitri @ Sep 8 2007, 05:17 PM)
Asus announce that several mobo like my M2N32 Sli Deluxe and M2N-E can be used for AM2+ after BIOS update. I am aiming for Quad Core Phenom soon.

Mr_47, we have similair setup. I reach 2.83ghz stable. Quite hard to go up. Please advise how much vcore i need to put for 2.9-3.0. My current vcore is 1.46 (but i set 1.44).
*
ur rig quite good.. why not lowering ur ram.. maybe can push until 4.0ghz brows.gif

Added on September 8, 2007, 8:35 pm
QUOTE(-pWs- @ Sep 8 2007, 01:45 PM)
1.5 maybe smile.gif
My setup 1.525 24/7 tongue.gif

-pWs-
*
maybe.. shakehead.gif have to wait until i get the title milionaire.. rclxms.gif
will try.. bcoz u doesnt have any prob with 1.525

This post has been edited by xixo_12: Sep 8 2007, 08:35 PM
xixo_12
post Sep 9 2007, 11:37 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(krekrekoke @ Sep 9 2007, 03:38 AM)
this maybe a noob question, so please bear with me

in biostar 690g bios, where to find fsb:dram divider?
i cant find it anywhere
*
mana ada.. just find the (DDR400,DDR533,DDR667,DDR8000) changing option

~xixo_12~
icon_rolleyes.gif
xixo_12
post Sep 10 2007, 10:58 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(arc_archive @ Sep 10 2007, 06:27 AM)
actually,im kinda confuse a bit bout the way amd divider  laugh.gif  its a bit differ from intel one.

but will try later as my stock heatsink crying for being to hot already!!  sweat.gif

need a better heatsink...last time pushing till 2.8Ghz..the temp shoot up too 60~65C when load. rclxub.gif
*
changing the new one..
« Next Oldest · Overclockers United · Next Newest »
 

7 Pages < 1 2 3 4 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0519sec    0.84    7 queries    GZIP Disabled
Time is now: 2nd December 2025 - 05:38 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.