Outline ·
[ Standard ] ·
Linear+
Digi Infinite Fan Club [V4], Infinite 150, 100, 80
|
maranello55
|
 May 2 2020, 12:57 PM
|
|
QUOTE(Berus Wine @ May 1 2020, 10:38 PM) From my understanding (correct me if im wrong im still new to this) B618s-22d - There are 2 version, one is locked to only celcom sim (cheaper), and there's modded & unlocked version which can be used by all sim (slightly expensive). B618s-65d - no reported lock unit. Can be used by all sim card telco. But most of the firmware for this unit is V81 which means future modding is not possible. Very expensive. Good if you're using i150 plan. It's all boil down to your own preference. I decided to go with the 65d since i dont really need the modding part & it support Volte out of the box. It also come with official Huawei warranty 1 year. Thanks for the info! |
|
|
|
|
|
kraziekd
|
May 2 2020, 01:23 PM
|
Getting Started
|
QUOTE(fruitie @ May 2 2020, 12:38 PM) Probably just during MCO, can easily call to request to reset after >300GB. i see.. ok thx |
|
|
|
|
|
Andrewtst
|
May 2 2020, 02:46 PM
|
|
|
QUOTE(kraziekd @ May 2 2020, 09:40 AM) in the fb group ppl been saying the 150 now already reduced from 1TB to 300gb? is it true? cause they shared screenshot with their engagement to digi cs and said the new fair policy usage is 300gb.. they been experiencing speed cap after using 300gb.. but yesterday I also talk to digi cs but he said it was still 1TB.. super confuse  I think is only during MCO, even though can request for reset quota but this is troublesome. I hope they change back after MCO. I just did, yes it is cap now when reach 300 GB instead of 1 TB. This post has been edited by Andrewtst: May 2 2020, 02:47 PM |
|
|
|
|
|
GameSky
|
May 5 2020, 03:38 PM
|
|
|
so it's still 300GB fup?
|
|
|
|
|
|
Andrewtst
|
May 5 2020, 08:51 PM
|
|
|
QUOTE(GameSky @ May 5 2020, 03:38 PM) It still is. |
|
|
|
|
|
alexchew_2020
|
May 6 2020, 10:37 AM
|
|
|
QUOTE(Berus Wine @ May 1 2020, 10:38 PM) From my understanding (correct me if im wrong im still new to this) B618s-22d - There are 2 version, one is locked to only celcom sim (cheaper), and there's modded & unlocked version which can be used by all sim (slightly expensive). B618s-65d - no reported lock unit. Can be used by all sim card telco. But most of the firmware for this unit is V81 which means future modding is not possible. Very expensive. Good if you're using i150 plan. It's all boil down to your own preference. I decided to go with the 65d since i dont really need the modding part & it support Volte out of the box. It also come with official Huawei warranty 1 year. if the modem cant put others telco sim it really does't worth for the prices. imagine someone u play to change others telco sim in somedays. custom firmware has more function vs the origin stock firmware. well, if using digi does't matter if it's 22d or 65d. cause u using b3 & b7 more often. |
|
|
|
|
|
3nergy
|
May 6 2020, 02:20 PM
|
New Member
|
Ah, got my Hmanager finally. anyone know how to configure the Hmanager? currently lock at band 3 only. any pro tip to improve  This post has been edited by 3nergy: May 6 2020, 03:20 PM |
|
|
|
|
|
alexchew_2020
|
May 6 2020, 07:05 PM
|
|
|
QUOTE(3nergy @ May 6 2020, 02:20 PM) Ah, got my Hmanager finally. anyone know how to configure the Hmanager? currently lock at band 3 only. any pro tip to improve hmanager is not a configuration. it's shown u reading your modem vs tower good or bad. RSRP, SINR normally only focus this two. if raeding is bad RED colour, u might consider relocate your modem, find a sweetspot within your house. good signal good speed. poor signal poor speed/speed lost. then play long check speedtest on single band vs 4G+. b3 vs b7 vs b3+b7. lock which ever is good connection. |
|
|
|
|
|
3nergy
|
May 6 2020, 08:50 PM
|
New Member
|
QUOTE(alexchew_2020 @ May 6 2020, 07:05 PM) hmanager is not a configuration. it's shown u reading your modem vs tower good or bad. RSRP, SINR normally only focus this two. if raeding is bad RED colour, u might consider relocate your modem, find a sweetspot within your house. good signal good speed. poor signal poor speed/speed lost. then play long check speedtest on single band vs 4G+. b3 vs b7 vs b3+b7. lock which ever is good connection. Ya I'm trying to test which band is better in house. Currently is 4g band 3. But how to get 4g+, when I put simcard in my phone I get 4g+ but in b618 I'm getting 4g only |
|
|
|
|
|
alexchew_2020
|
May 6 2020, 08:52 PM
|
|
|
QUOTE(3nergy @ May 6 2020, 08:50 PM) Ya I'm trying to test which band is better in house. Currently is 4g band 3. But how to get 4g+, when I put simcard in my phone I get 4g+ but in b618 I'm getting 4g only use hmanager to lock band, b3+b7. before that check both band signal strong or weak. |
|
|
|
|
|
3nergy
|
May 6 2020, 09:30 PM
|
New Member
|
QUOTE(alexchew_2020 @ May 6 2020, 08:52 PM) use hmanager to lock band, b3+b7. before that check both band signal strong or weak. hmm, strange, I can only lock only 1 band at one time, mean if I lock b3, I cannot lock b7 together. it either B3 or B7. I can't do B3 and B7 My Hmanager is version 4.1 This post has been edited by 3nergy: May 6 2020, 09:32 PM |
|
|
|
|
|
alexchew_2020
|
May 6 2020, 09:35 PM
|
|
|
QUOTE(3nergy @ May 6 2020, 09:30 PM) hmm, strange, I can only lock only 1 band at one time, mean if I lock b3, I cannot lock b7 together. it either B3 or B7. I can't do B3 and B7 My Hmanager is version 4.1 select both and lock cant? lol i'm using v1.3 only...v4.1 not sure This post has been edited by alexchew_2020: May 6 2020, 09:41 PM |
|
|
|
|
|
3nergy
|
May 6 2020, 09:57 PM
|
New Member
|
QUOTE(alexchew_2020 @ May 6 2020, 09:35 PM) select both and lock cant? lol ok, I use 1.3 can lock both b3 and b7. currently all 3 bar are ion green. 4G-1800+2600 FDD |
|
|
|
|
|
alexchew_2020
|
May 6 2020, 10:14 PM
|
|
|
QUOTE(3nergy @ May 6 2020, 09:57 PM) ok, I use 1.3 can lock both b3 and b7. currently all 3 bar are ion green. 4G-1800+2600 FDD how the speed? b3 vs b7 vs b3+b7 |
|
|
|
|
|
syahpian
|
May 6 2020, 10:18 PM
|
|
|
QUOTE(alexchew_2020 @ May 6 2020, 09:35 PM) select both and lock cant? lol i'm using v1.3 only...v4.1 not sure 4.1 cannot, not sure why, but 4.2 can lock multiband  |
|
|
|
|
|
3nergy
|
May 6 2020, 10:29 PM
|
New Member
|
QUOTE(alexchew_2020 @ May 6 2020, 10:14 PM) how the speed? b3 vs b7 vs b3+b7 speed wise not much different, in Ai life app, test signal show better signal, full blue bar compare with previous at green bar. Getting constant 40-50mbps, quite satisfied with but the B618 doesn't do much work compare with my Huawei mate 20 hotspots. Just good for my family to use internet while waiting for port |
|
|
|
|
|
3nergy
|
May 6 2020, 11:06 PM
|
New Member
|
QUOTE(livellorT @ May 6 2020, 10:50 PM) Possible to reset quota through MyDigi chatbot? or still have to call CS? I never does that, but from previous thread chat, you have to chat with a CS to get it reset. |
|
|
|
|
|
yuen1985
|
May 6 2020, 11:29 PM
|
|
|
QUOTE(livellorT @ May 6 2020, 10:50 PM) Possible to reset quota through MyDigi chatbot? or still have to call CS? Just type livechat and you will connect to CS |
|
|
|
|
|
QuantumEdge
|
May 6 2020, 11:59 PM
|
|
|
QUOTE(alexchew_2020 @ May 6 2020, 09:35 PM) select both and lock cant? lol i'm using v1.3 only...v4.1 not sure  New ver can't do carrier aggregation. Only the old v1.3 can do it. |
|
|
|
|
|
syahpian
|
May 7 2020, 12:12 AM
|
|
|
QUOTE(QuantumEdge @ May 6 2020, 11:59 PM) New ver can't do carrier aggregation. Only the old v1.3 can do it. » Click to show Spoiler - click again to hide... « [attachmentid=10484407] the newest version can do it |
|
|
|
|
Quote
0.0179sec
0.38
6 queries
GZIP Disabled