Technical A n00bie's foray into the x-clamp solution, Definitely not for the faint hearted
|
|
 May 9 2010, 02:36 PM
Return to original view | Post
#1
|
 
Elite
5,093 posts Joined: Mar 2009 From: Land of make believe  
|
Anyone over here have tried the heat gun/ oven baking method? I've done the X-clamp fix but the Xbawks still has the 3LOD.
Error code shown is 0021, so the chips needs extreme heat. But the problem is that nobody I know owns a heat gun and it's freaking expensive just to use it for a small repair. |
|
|
May 9 2010, 11:52 PM
Return to original view | Post
#2
|
|
Elite
5,093 posts Joined: Mar 2009 From: Land of make believe
|
QUOTE(dlwl @ May 9 2010, 11:09 PM) i've tried the xclamp method, it still did not work. should i repeat the same method again to see if it has a chance to work, or can i try other methods? Xbox 360 error code? |
|
|
May 10 2010, 11:42 AM
Return to original view | Post
#3
|
|
Elite
5,093 posts Joined: Mar 2009 From: Land of make believe
|
QUOTE(dlwl @ May 10 2010, 01:58 AM) how do i check? coz i got this xbox from a friend..he left it with me now.. - Turn on your Xbox console and wait for the 3LOD- Hold the SYNC button, located beside the Memory Card Slot B and don't let go until instructed - Press the eject button once. The number of lights will show* - Wait for 3 seconds and press the eject button again. The number of lights will show* - Wait for another 3 seconds and press the eject button. The number of lights will show* - Wait for an additional 3 seconds and press the eject button. The number of lights will show* - Wait for the last 3 seconds and press the eject button. The 3LOD will re-appear - You can let go of the SYNC button and switch off the console *Interpretation of the blinking lights 1 light - 1 2 lights - 2 3 lights - 3 4 lights - 0 So my Xbox had the error code 0021(which meant 4,4,2,1) that generally stated either wrongly flashed drive or cold solder joints on the Southbridge Added on May 10, 2010, 11:47 am QUOTE(scpt @ May 10 2010, 10:37 AM) http://xbox-experts.com/tutorial/the-ultim...eflow-tutorial/ Any idea on what's the Hybrid fix about?Try this method. It worked for me, but lasted only 3 days of use  Probably I didn't do it properlyThis post has been edited by UserU: May 10 2010, 11:47 AM |
| Change to: |  0.0245sec
 0.89
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 03:09 PM |
Quote