Some adapter is auto downgrade the resolution based on the screen using HDMI ( I forgot the term).

Normal operation phone not near to HU la. Someone hold that so I can take the pic to prove both have same screen.

ps: i not using HDMI at all, I prefer waze on my phone. all pic taken during my test with other honda city owner. (when they came to my place to install bypass cable)

Bypass cable is a must if you want to see the screen using driving.

Can ownself install but not so easy. Easiest way is to remove the HU and do the connections from the back. There are 2 connectors that you need to disconnect and re-connect with bypass cable.

Another way is to go thru the glove compartment area. Here is how I did it https://forum.lowyat.net/index.php?showtopi...post&p=86142546

For FL from RM80 - 120. For me very easy to install, no tools required, just need to open glove box. 4-5 minutes done. Last month I sent 2 cables to Johor and Terengganu, both installed themselves.
Give them spare tire, at least smaller.

Now I thinking about giving my spare tire to my uncle. He is very active and creative modifying/creating custom bike.

Thanks to gsan bro!

[attachmentid=10066397]

Now i just have to find a way how to remove the door armrest cover without scratching or breaking it 

Maybe you can try leather case. I am using it for 11 months already. So far the case still look as new. Cheaper if buy from aliexpress. Lelong also got but abit more expensive

https://m.aliexpress.com/item/32837422708.h..._platform=msite

If leather/pu cheap good quality like this can bulk order. Me want one. Black red look nice.

Pm tepi.

Look nice. Oh ok order sindiri lo.

I try to look first at acc shop. Mana tau ado.

Tq tq.

Experienced this today.

Unable to lock my car using button at driver's door. Car gave off beep beep beep sound. Checked all doors and boot cover - all shut tight.

Sekali saw the engine was still running, because I forgot to switch off. Lol. The car engine and radiator fan are too quiet.
Can I complain to SC?

For FL, its easier to spot if engine isn't off, the push start button will go from red to clear when engine is off.

Do get it checked if there's any short. Otherwise replacing fuse will not solve the problem and you would be replacing fuses very often. No won't void warranty if you know which to replace and using proper Amp replacement fuse.

It could be, though typically its caused by bad wiring which crossed exposed leads, improper connections, or even fuse rating incompatible (ie. lighting draws 20A but you use 15A rate fuse). Unless you know how to isolate and check them out one by one, better to get a wireman.

BTW, bypassing the fuse using a wire is a very, very, very bad idea. I would just pull the fuse out and disable the lights instead until a suitable fuse is replaced. Unlike houses where they have master fuse to disable all power to protect the circuit, a car does not. So if a surge current again goes into the lights, it might burn the system and have possible risk of fire. Fuses are there for a reason.

And they are easily found in car acc shops and hypermarkets, and even car electrical workshops. Also I'm not sure but please check if there are spare fuses available at the fusebox (I recalled my Persona has them and i used a couple during my years of ownership). Don't take risk.

Let me get this straight. So the fuse you replace is at this cylindrical one at LED light circuit and not at the fuse box? I guess I misunderstood that it was a fuse from the fuse box (those flat multicolour ones). The cylindrical one you showed might only can get from car acc or electrical shops. It looks like a house appliance fuse but I doubt the wattage/amp is compatible.

If it blown at the light circuit, high chance there is a short there. Might have been caused by the water intrusion. Another possibility is you tapped a too high power source for the lights. Or you might just gotten a bad fuse with the package, since its probably Made in China and all that. Do get a wireman to check or return to complain to the installer/supplier.

For safety’s sake, just disable the stupid led lights lah. Pot Khai mang meh need lights down there? So pandai want to bypass fuses.
Either get it checked at a car accessories shop soonest or disable for now.

I think you mean the  fuse inside the black holder right?

[attachmentid=10098927]
Sorry to say, those at accessory shop so dumb if never see the fuse before. That cylinder glass tube fuse use in a lot of household products, car charger, 3pin plug, in computer products, in motorcycle (some old model). I think mostly more than 30 being use in my house right now and I have a lots spare around.

If you go to electrical shop or some supermarket, they sell in pack of 3. No kidding, I buy at small supermarket before, 3 for RM1. I can't take any picture because I not sure the fuse in which tools box. (I have more than 10 tools box or maybe at my other house)

Anyway, here is 1 sample from my dashcam power adapter.

[attachmentid=10098961]

Bro, u can easily get those fuse in electronic shop or hardware shop (五金店). Just that u need to know the current (A) & voltage (V). These can be found engraved on the metal. Buy the same current & voltage will do.

Cannot lah. Will void warranty one.

Better ask SC first. If not ah. Later kena.