Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

Unifi Official TM UniFi High Speed Broadband Thread V35, READ 1ST PAGE FOR TURBO SPEED INFO!

views
     
mhwee
post Sep 20 2018, 04:38 PM

Getting Started
**
Junior Member
241 posts

Joined: Sep 2005
From: Johor
QUOTE(aeran @ Sep 20 2018, 02:56 PM)
Guys, based on this article,
https://www.blacktubi.com/guide/make-any-ro...-work-on-unifi/

does it mean I can use Tenda latest firmware without worrying about Unifi compatibility?
*
I suggest you don't buy this switch. I bought the same model of this tp-link switch. It worked when you just setup and you could have iptv and internet split before router.
I was able to use any router to pppoe and connected to internet.

But after a few days, the switch seemed getting saturated and the iptv signal just gone. You will need to restart your switch to get the signal back. I don't think the unit that i bought was faulty. It is because i bought 2 units at the same time, sealed box. They got the same problem

I refer to the same way of settings and changed to similar switch Netgear GS105Ev2. It works until now. Never see any problem.

Taobao is selling dirt cheap https://detail.tmall.com/item.htm?spm=a230r...s=1&abbucket=14

side note: in case you really buy from taobao, remember to get this https://detail.tmall.com/item.htm?id=689058...&_u=kekia3vf25d

because the power adaptor's pin is slope type. (The unit uses 240v same as in malaysia)

This post has been edited by mhwee: Sep 20 2018, 04:51 PM
mhwee
post Sep 20 2018, 06:00 PM

Getting Started
**
Junior Member
241 posts

Joined: Sep 2005
From: Johor
QUOTE(miloaisdino @ Sep 20 2018, 04:55 PM)
I would like to share my bad review of netgear gs105ev2. Firstly, it requires a stupid utility that only works on windows to configure. Second, the switch crashes at random times a week or multicast storm (iptv) or when i enter too many vlans. I ditched it for a tplink tl-sg105e which had a nicer interface and didnt crash.

Oh and btw i rate limit my iptv port to 100base-t, 30mbps qos it helps
And btw mine was only rm105 (compared to netgear is cheap)
*
I bet you never Google about the default IP of the switch. It is 192.168.0.239 after 1 min no dhcp server to give it ip address. I never use the utility to set.
https://kb.netgear.com/30418/What-is-the-de...rt-Cloud-switch

I have no crash experience on netgear. But that is for me. Doesn't necessarily apply to others biggrin.gif by the way, remember not to have any vlan or IPTV setting on the router, since you follow the website method, splitting vlan in front .

Good luck with that tplink switch.

This post has been edited by mhwee: Sep 20 2018, 06:32 PM

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.2409sec    0.61    7 queries    GZIP Disabled
Time is now: 3rd December 2025 - 03:43 AM