Outline ·
[ Standard ] ·
Linear+
Mikrotik RB750GL - TM Turbo 500MBps
|
TSjackdon
|
 Sep 12 2018, 02:09 PM, updated 8y ago
|
|
Hi,
Just found out that my package was upgraded to 500Mbps.
A. 1st tested and max was only 100Mbps.
B. Check it was the LAN cable, Cat 6 split into 2 connection cannot go to 1GB. Recrimp to single connection
C. Recheck and speed not is 200Mbps.
D. Found out that the Mikrotik RB750GL (quite an old model) is only 400mhz with 64GB
On TM Speedtest the CPU on the Mikrotik RB750GL = 100% when the speed test = 200Mbps.
Time to upgrade the router. Any recommendation.
Jackdon
This post has been edited by jackdon: Sep 12 2018, 02:10 PM
|
|
|
|
|
|
TSjackdon
|
Sep 12 2018, 02:21 PM
|
|
|
QUOTE(ldragon @ Sep 12 2018, 02:13 PM) Enable the fasttrack to the firewall rules, that reduce the CPU load. Put it to the top of the firewall rules /ip firewall filter add chain=forward action=fasttrack-connection connection-state=established,related add chain=forward action=accept connection-state=established,related add chain=forward action=drop connection-state=invalid Firmware = 6.27 Cannot seems to get this command to work Do I have to upgrade to latest version |
|
|
|
|
|
TSjackdon
|
Sep 12 2018, 02:23 PM
|
|
|
QUOTE(-oc-gassa @ Sep 12 2018, 02:20 PM) u received any SMS prior to speed upgrade? Notification was about 1 to 2 months ago, I login to unifi protal and saw that my package was upgrade a few days ago |
|
|
|
|
|
TSjackdon
|
Sep 12 2018, 02:49 PM
|
|
|
QUOTE(ldragon @ Sep 12 2018, 02:24 PM) yes, upgrade to the latest package 6.43 Yes, it works. I get 512Mbps and CPU resources is max 98% Thank you   
This post has been edited by jackdon: Sep 12 2018, 03:04 PM |
|
|
|
|
|
TSjackdon
|
Sep 12 2018, 05:00 PM
|
|
|
QUOTE(soonwai @ Sep 12 2018, 04:14 PM) Not bad for a really old router. I have tons of these. Ok, not a ton, about 8 units. I like Mikrotik router, very stable and never needed any reboot at all. Works well and very flexible with its firewall and rules. Only problem is that I am not very good at these  but I get by with google and asking here and there. |
|
|
|
|
|
TSjackdon
|
Sep 12 2018, 05:42 PM
|
|
|
QUOTE(soonwai @ Sep 12 2018, 05:28 PM) LOL, same here, I also learn from google and wiki. After awhile you know a bit more than the next guy, suddenly become sifu already. Now thinking of migrating to PFSense. I have a working HP Micro Server N40L with an AMD Turion Dual Core processor 1.5GHz. Intel Dual Port Gigabit NIC installed. PowerSupply is silent and robust small enough to put in a corner. Should be good and fast enough Now need to do some googling here and there. |
|
|
|
|
Quote
0.0166sec
0.43
7 queries
GZIP Disabled