Improve front camera
Improve fingerprint
Enable volte not for MY

Don't know how to attach screenshot, sorry.

No worries. Darn, doesn't remove Atok

Source : ZenFone Max Pro ZB602KL_ WW_15.2016.1808.326

This post has been edited by azhar75: Sep 5 2018, 07:10 PM

Note 9 and M1's battery life really got so much difference ? Anyway I bought M1 because of the following points :

1) Value for money
2) 5000 mAH battery
3) 2 sim cards slot and 1 independent
memory card slot.
4) Screen looks more vibrant than RN5.
( because I compare them side by side
on the spot ) 😀

More fingerprint reader enhancements, hahaha...

Yes, massive difference. I bought the M1 for the same reasons 1 and 2 and also their so-called Stock Android

4000 mAH and 5000 mAH battery life, care to elaborate in term of SoT ?

updated to the latest firmware, indeed the fingerprint's response has improved a lot.

normal use 1k mAH = 3 hour x 5k = 15 hours
Hard mode 1k mAH = 2 hour x 5k = 10 hours or less

If follow your theory , note 9 should have at least 10hrs SoT , not bad rite ?

Totally agreed with you.👍

That’s an unachievable dream, unless you loop a video for 10 hours straight or something, haha.

Battery drain during standby is disappointing.

Nope. U need to consider power consumption of the phone regarding the software n tech they r using.

Just checked atok, yandex, yandex browser removed.
Fyi, all 3 was disabled manually before updating.

thanks for the info, now I only noticed, really slowpoke . hahaha

Crap 6/9/18 RN5 3gb/32gb sales real tempted rm599, but the 4gb/64gb no promo, same goes to Asus M1 4gb/64gb nooo promossss

Yup, I did the same thing, disabled it before, after the update, cant find these three apps!

I think the M1 4/64 will be on promo come Sunday, 9/9. Patience, bro

Try Naptime, bro. I guarantee you'll not be disappointed. I confirmed the deep sleep with GSam battery monitor. It really does make a difference to standby drain with Aggressive Doze. Compared it with Greenify's AD and found Naptime performed much better.

Btw, you guys see any improvement with the auto brightness issue with this latest update?

Thanks for the recommendation bro, let me try it out and see. Any root required?

Nope. No root required. Just need to input 2 adb commands via PC, after enabling developer options and USB debugging. The steps and commands are described on the site itself.

Easy peasy.

This post has been edited by zenman: Sep 6 2018, 09:14 AM