i can't get to work at ram 800mhz., n650i + E6600 ES
|
|
 May 23 2007, 11:22 PM, updated 19y ago
Return to original view | Post
#1
|
 
Senior Member
2,582 posts Joined: Jan 2003 From: Born in Sri Aman.  
|
my setup
E6600 ES Asus N650i Kingmax 1GB DDR2 800 Galaxy 7900gs. cooler master hyper tx north bridge thermaltake extreme spirit II south bridge no cooling. i tried vcore 1.5 (is it too high?) 9x400 = 3.6ghz cannot work. 9x387.5 = 3.487ghz cannot work. now i'm on 9x380 = 3.42ghz. see picture attached. i tried 8x400 = 3.2ghz cannot work vcore 1.5 i tried 7x400 = 2.8ghz cannot work vcore 1.5 how should i set vcore? memory voltage, what's the default? Attached thumbnail(s) 
|
|
|
May 24 2007, 12:36 AM
Return to original view | Post
#2
|
|
Senior Member
2,582 posts Joined: Jan 2003 From: Born in Sri Aman.
|
which is FSB voltage?
NB voltage is default. |
|
|
May 24 2007, 07:23 AM
Return to original view | Post
#3
|
|
Senior Member
2,582 posts Joined: Jan 2003 From: Born in Sri Aman.
|
my ram is kingmax DDR2 800 cheap ram i think.
which option is the best if i don't overclock. (default 2.4ghz) 1. set the ram at sync mode with FSB, running 533mhz for DDR2 1066 for FSB 4-4-4-12 2. set the ram running at 800mhz for DDR2 1066 for FSB 5-5-5-18 |
|
Topic ClosedOptions
|
| Change to: |  0.0138sec
 0.67
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 01:35 AM |
Quote