Good?

Heard the button needs at least rm100?    

Cool. Then need 3 wires hardwire kit.

But above rm50+++ is too much for a BT button to take pictures and emergency recording. They should do like DDPai and include in the package.

VIOFO RM100 Bluetooth BT Remote Control RC for A129 Car Dash cam US$29.90 😅

http://s.aliexpress.com/JbeYvqER

Aliexpress anniversary sale!
Macam not bad wor... 32GB & 64GB MLC for US19.99 & US32.99

https://www.viofo.com/14-accessories

Can check the hardwire kit for A129 duo still not available yet? thanks

not sure how to do it via the a129.

mind to share your settings that you have set for the a129?

Tq
Yes i'm syncing my a129 with my phone for the clock.
Is there any way for no need to sync it everyday?
Yes my a129 will have slightly delay time to completely off when i turn off my car engine.
Btw currently i'm using a119 hardwire (2wires)+fuse tab

I am refering to Viofo A129. Want to get this for my Mazda CX-5. Also want to make sure the 3 wires kit works. Anyone already done this installation, please comment or best provide a video tutorial! 

gps sync time zone? didnt know that

As promised my report. It's a very disappointing unit IMO, as I paid 1k, which is still not cheap. I don't mind some issues, but I've great concern when no recording but beep sound not working. This defeats the purpose of dash cam, I could easily missed some critical footage.

I'm not sure how to claim for warranty or repair, because issues happen occasionally, so it's very hard to prove my claim.

Imagine the recent "Abong Botak" case happened, and thought everything recorded but it was not. Or worst, maybe hit someone who breaks red light, causing serious injury or death, but notice it was not recorded, hence unable to prove innocence.

1) Failed to record (once)
- parking mode on with 1fps
- first parked my car, everything recorded
- then drove the car, driving footage all recorded too
- parked at another location, this time the parking footage was not recorded (parking mode still on)
- started engine, then realised recording light was blinking. No beep sound.
- screen was black, unable to turn on screen, pressed all keys (long press, short press etc) but no response from unit at all. Connect wifi to phone, wifi connection successful, but unable to "connect to camera" from the app.
- drove back, reached home, unplug all cables and plug everything again, then it's working again

2) Failed to record (twice)
- parking mode on with 5fps
- parked my car, stop engine, unit turned on with both lights stable (which means recording in parking mode activated)
- after work, start engine and drove back (didn't check the recording)
- when reached home, only realised red light blinking. Checked back recording, both parking and journey home was not recorded.
- no beep sound to indicate that recording was not done during driving
- bought a new memory card, and it happened again, similar scenario

3) Unit hang (twice)
- unit hang, unable to press any button
- then only realise can restart unit, then after restart back to normal

Thanks all, I'll try factory reset first and flash the latest firmware and see if it works.
For beep alert, it's not the settings, alert is enabled. Whenever I access the app and stop the recording, the beep alert is working. So I really unsure why the few occasions no warning for the failure to record the footage.

I always do that, in fact in switch on and off everyday (not sure if that will somehow affect the device becoming unstable, but it shoudn't).

Because when I reach home, I will disable the parking mode, then when I reach office, I will enable it again. So quite troublesome, I have to switch on and off everyday

WDR is a double edge sword feature. On some condition, it's providing too much contrast or over-brightness of your recording.

Hence you may need to evaluate and review the recording a few times to suit your taste. For my case I leave it on, since I'm happy with the results recorded since Day 1 purchase.

My G-sensor is on low due to pot holes / bumpers / uneven roads in Klang Valley area. (I know right?) Wouldn't want too many false alarm recording and beepings......

Boot delay - 0 seconds.

I just noticed that my car with start stop engine feature, the dash cam will enter parking mode when the engine shuts itself. Then when the engine is back up running, it will revert back to normal recording.

I'm not sure if i did the hardwire kit correctly or not.