If problem still persist tomorrow will make a report to Premium Customer service

I'm getting much more speed now 3.5 Mbps maybe midnight kot

Maintenance already finish yesterday but problem still persist

Please call during office hour so u can connect to premium support

All ip range 218.111.XXX.XXX is fakap now

Yeah agreed manage to download 10gb of data during that time now peak hours back to slow routing at 1 Mbps

Just talk to TM Premium customer they are fibre optic problems along this area Wangsa Maju they are still fixing it

Those who are affected are encourage to call TM regarding the slowness issues

So they will know they are having problems

Make sure you got the contact Report Number regarding the issues otherwise u waste time on local call

This post has been edited by MX510: Nov 12 2009, 02:54 PM

I'm getting back good speed now 300 to 400

New ip range kot

218.111.66.XXX

This post has been edited by MX510: Nov 12 2009, 08:29 PM

Peak hours morning until now around 100 to 250 and midnight will get 450 until 6 a.m all my MKV only que during this time

Make a call to tm.nut and they reset my port from 5096 to 4096 so fakap then call any speed improvement i said now getting slower

I'm getting back maximum speed of my 4 Mbps not sure others already have the same speed or not

Downloading at full speed from my flux servers now

Speed is back crawling when Monday comes

All ip range doesn't seem to be improvement for the speed

Currently connected to 218.111.66.XXX

Yeah i have no intention to upgrade my second line to 4 Mbps it's running good already at 1.5 Mbps . Hopefully this is just temporary until they fix everything back to normal.

Well time will tell it.

TM.nut FAKAP

They won't charge you unless u ask the technician to rewired your cables

Make speedtest from frankfurt germany

I also got that speed what program do u use bro?

Nice got timeline and speed graph

Got link to download it?

Just fakap TM customer service they fakap downgrade my jumper speed.

Before this it was 5096

SNR 16.8

Attenuation was 36

For HSI Plan Snr should be bigger than 15db and attenuation is below 40

Maybe someone fakap the cable at the dslam that caused this

Nope no frequent disconnection, bad speed and routing, anyway the TM haven't close my report they will check their equipment

Before this it was 5096

SNR 16.8

Attenuation was 36

TM return back my 5 Mbps jumper speed

Finally got back in speed but have to multitask download 3 files serentak during peak hours to get maximum speed otherwise will stuck at 1.5 Mbp





During non peak hours speed is great 1 single file download can reach up to 550kb/sec

Speed is capped based on username :-)

Capping at higher speed doesn't mean u can get high speed if ur SNR margin is not good ur connection will be become FAKAP.

However the speed capped higher can make you go beyond ur limit for example jumper speed at 4096 kbps can make you go about 450 kb/sec

And jumper set for 5096 can make your can make your speed go to 550 kb/sec

This also depend on TM.nut network routing