I'll give MX-1 a try first...right now, the temperature fluctuate like mad during idle...

One question, do you guys use TIM removers like ArtiClean or plain tissue will do?

I tried looking around Lowyat, Sg Wang and Imbi for MX-1. Seems like all they have are white goop and CM products (Nanofusion, HiPerformance, Premium, etc etc)

hahaha....i've been there like your situation. Lowyat Plaza really cannot offer anything exotic or a wide selection of products. If you wan these stuffs...try looking around at trade zone....

by the way, i clean off the TIM using only those cloths for cleaning our spectacles...

dont have money to buy articlean..just use kain..

i see mx-1 at lowyat 2 weeks b4..the shop is infront of viewnet...if im not wrong...like to try is oso but just bought the as5 from bulk..

I do use the Arctic Clean. Very useful if you ask me for RM25 only. Using it for quite a while and its still available now. But many people did say using other method is ok as well like using those nail polisher or alchohol stuff (even minyak angin). Clarify with them and see...

Its not easy to use tissue only. Sometimes when the TIM hardened, its hard for you to only wipe with tissue. You will need TIM remover to help remove it or else, risk scratching the IHS of your processor..

i personally use my dad's zippo to clean remove those TIM..
well, its kinda hard when the it got hardened but the result is ok lar..not so bad for using a zippo

Yea, hardened TIM is kinda hard to remove. I am fine with my Arctic Cleaner.Used so long already and its still good..

for those of you who are looking for the XS source, here it is:

http://www.xtremesystems.org/forums/showthread.php?t=135359

Bulk order only have AS5 but the MX1 currently noone is selling right?I'm also interested to get 1 MX-1

This post has been edited by raymond5105: Jul 3 2007, 09:49 AM

Well, i saw many people here had said that the MX-1 indeed does perform better than the AS5. They say there is a drop of roughly 2 - 3c when compared to AS5.

Yaya,i also read this thread here.The result is better than the AS5. I'm planning to get one for myself later.Hehe.

see this review from indonesia!!

this thermal paste rock but not for aluminium!!

http://www.obengware.com/uji/coollaboratory.htm

it beat AS5 handdown!!!!!

---

Added on July 4, 2007, 8:18 pm|outstanding thermal interface|
Arctic Cooling MX-1 51.5
Shin-Etsu MicroSi MPU-3.7 50.5
Coollaboratory Liquid Pro 50


Based from above thermal paste!!

now i am waiting for the delivery of Shin-Etsu MicroSi MPU-3.7 50.5 and
Coollaboratory Liquid Pro 50

I have also ordered the Coollaboratory MetalPad as well..

there is a new paste using diamond!!
trying to get it in!!!
as good as AS5.....no need burn in... performance as good as AS5



Update again;
For Diamond Thermal paste...there are two brand out there as shown below;
(a)IC Diamond 7 Carat Thermal Compound....goggle "Heatsinkfactory.com "

and

(b)JetArt Nano Diamond Thermal Compound....goggle jetart.com.tw

Diamond paste is as good as AS5 and the best is ...no need burn-in as compared to AS5...needs about 200hours as stated in thier website.


Currently trying to order online but yet to find any seller that willing to ship to malaysia

Now,just waiting for my Shin-Etsu MicroSi MPU-3.7 50.5 and
Coollaboratory Liquid Pro 50 and Coollaboratory MetalPad..



This post has been edited by MakNok: Jul 4 2007, 08:35 PM

So what happened to the results of all these tests ?

just putting mx-1 to my 7900gt, my gc temp is lower 6 degree now

I got 4 different types of thermal paste from ShinEtsu Micro Si....all in syringes....Should be the latest from ShinEtsu Micro Si

I lazy to test them out....

Any one want to help to try them ?

Just pay the poslaju ...I ship to u to try it out...

coz I want to know the result of this...

Just send me a pm coz I seldom post here....

This post has been edited by kinwai88: Sep 29 2007, 11:32 PM

Is coolermaster thermal paste good compared to the products on the 1st page?

Lol, everyone here is looking for the MX-1, I'm kinda looking for the IC Diamond Carat 7, anyone knows where to get one? and what about the pricing and stuff.

a Good suggestion for the a paste cleaner would also help

Hey guys,

I need some recommend Thermal Paste i can get from Lowyat Plaza.

why is everyone looking for mx-1 when there is the super performance mx-2? i bought it at rm48 @@

Cause u were reading the post which is few years ago