-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:19 PM

There is no way to circumvent that requirement as far as I know. For Internet access, you can only select Unifi-Home or Unifi-Biz (in the ISP profile section.)

STB also got username and password inside, if want to sell off or gv to others, please reset it

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:19 PM

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:20 PM

as I know, only enterprise router / switches can modify the VLAN settings…consumer router cannot do it…

Since you have switches then don't care about the VLAN port already. Too much headache unless you consult from ASUS themselves for your additional knowledge. My 2 cents.

Add + one more switch then solve your problem for the port.

This is how you do it.


Attached thumbnail(s)

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:20 PM

You shouldn't set it as none as it will disable the VLAN. I don't use HyppTV, so I kept it in my store room and change the LAN 4 port to Internet port. Have you followed my settings above?

FOLLOW THE VALUE OF VID THAT I PUT ABOVE AND INSERT IT INTO YOUR ROUTER.

You cannot separate your plan without UniFi but you can throw it at aside and change the port for HyppTV for Internet.

This post has been edited by mztang52: Mar 25 2018, 05:37 PM

https://www.blacktubi.com/guide/make-any-ro...-work-on-unifi/

That's not how you set it up. You only need a smart switch when the router doesn't support VLAN tagging function. Most of the routers these days you see in Malaysia Computer store supports VLAN tagging already so you don't need a smart switch in order for you to connect to UniFi. But the problem that TS has is that TS wants to setup his router to work without HyppTV. Basically HyppTV utilizes one port from the router but if you want to use it for Internet purpose, you have to edit the VLAN ID to the exactly same as the VLAN ID for Internet connection. BTW, thanks for your post. Blactubi's website has always been a good reference.

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:20 PM

Can you allow me to help you to configure it?

but can you make hypptv wireless? like rg4322?
my family needs hypptv/astro.

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:20 PM

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:21 PM

Sorry, the IPTV doesn't work over WiFi. Asus doesn't support VLAn Tagging Via WiFi.

It is pretty simple. Just go to LAN, IPTV and alter the settings will do.

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:21 PM

Can you show me a photo of your settings when you are on manual? Perhaps yours is a little different.

This post has been edited by mztang52: Oct 26 2020, 08:14 AM

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:21 PM

Okay, then leave VID value for LAN port 4 and 3 empty.



This post has been edited by mztang52: Apr 1 2018, 03:31 PM

add a switch i think

-deleted-

This post has been edited by skeelee: Aug 18 2022, 08:21 PM

no problem bro.

Hi there.. please help...

Just bought asus RT1200G+ few days ago.

Having the NO internet issue similar to the above case. I followed the steps mentioned above and still without success.

I reboot so many times that i think the router has gone mad ie when i entered router admin password.. it sort of copypaste this password onto my PPP password on WAN setup..

Very frustrating....

Necro this thread.
This works on Asus ac66u.
Yay. Save money no need buy new switch.

This post has been edited by mj31382: Oct 25 2020, 03:18 PM

Hi all... necro this tread again as it also saved me some effort.

I am currently using the AX-86u on firmware 3.0.0.4.386_41535. As the previous comments mentioned to tag LAN4 as 500, unfortunately it did not work for me. But this new setting now does.



Previously if I tried to put LAN3 and LAN4 as 500 neither port will work for internet or intranet. This seems to have solved it.... There is the 2.5G port which I have not tested to see if it also enable it yet (in this firmware it seems the issue has been to make the port WAN only rather than the LAN/WAN it was supposed to be).

I set my ISP profile as Unifi Business and able to use all 4 ports.

Necroing this thread to confirm this really does work. Thank you sir

i tried manual setting LAN 4 still no internet

after try unifi busines , LAN port no4 not tag to unifi tv,

but LAN port no4 still no internet access after connected to laptop lan port.

if lan cable changed to router port no3, got inernet access

any other way to make LAN port no4 got internet access?

thanks

This post has been edited by sgpdsmss: Dec 9 2021, 11:12 PM


Attached thumbnail(s)

Maybe you can screenshot us what you have on the screen.