Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 192.168.1.1 unable to enter Admin Control Panel, Part 1 ( Solved)

views
     
TSmissysleepy
post Feb 1 2018, 01:37 PM, updated 7y ago

Enthusiast
*****
Senior Member
718 posts

Joined: Mar 2014
I did a firmware upgrade from ASUS and after that i can't access to my Admin page anymore.


Some of the method i have apply to troubleshoot are as follow , but there's still no solution to it yet.

1. I have done hard reset of the router. Power LED flickered .
2. Did a reset using 30-30-30 method
3. Change Internet protocol iP4 to Auto Ip .
4. did a Ipconfig Flush DNS in Command prompt
5. did a Ipconfic/renew in command prompt
6. tried changing Lan1,2,3,
7. Change computer from PC to MAC, same problem, auto diagnostic unable to settle the problem.
8. Double confirmed my Password with UNIFI , password correct.
9. Use Unifi Dlink router to access , PASS. No issue with DLINK router when setting up with PPPOE using Unifi password.

Running out of option now after following all guidelines in google.

Call Asus and 1st reply was reset the router. that's the only advise given . Second reply by them, my router is out of warranty date and they refuse to continue giving any troubleshooting.

This post has been edited by missysleepy: Feb 2 2018, 01:54 PM
mi-g
post Feb 1 2018, 01:44 PM

Part-time Troll
******
Senior Member
1,482 posts

Joined: Oct 2004
From: ISA Detention Room -Port Valdez-



type ipconfig at command prompt

does 192.168.1.1 listed as Default Gateway? if not, then whatever IP shown as your Default Gateway is your admin IP
amp
post Feb 1 2018, 01:52 PM

Getting Started
**
Junior Member
105 posts

Joined: Jan 2003
From: Midland
https://www.asus.com/my/support/FAQ/1000814/
can be used for any asus router model.

general breakdown:
1. download the correct firmware for your exact model. verify the checksum, sometimes u may have a broken download.
2. download the restore firmware utility.
3. set ur pc ip address.
4. put the router in the rescue mode.
5. restore the firmware using the utility

read the full guide properly.
if it still does not work, tough luck.

This post has been edited by amp: Feb 1 2018, 01:56 PM
mastermindsos
post Feb 1 2018, 01:59 PM

Casual
***
Junior Member
372 posts

Joined: Jan 2009


QUOTE(mi-g @ Feb 1 2018, 01:44 PM)
type ipconfig at command prompt

does 192.168.1.1 listed as Default Gateway? if not, then whatever IP shown as your Default Gateway is your admin IP
*
Agree with this.
If 192.168.1.1 still remain as the gateway, then please clear your browser cache or use the browser incognito/private mode.
TSmissysleepy
post Feb 1 2018, 09:43 PM

Enthusiast
*****
Senior Member
718 posts

Joined: Mar 2014
QUOTE(mi-g @ Feb 1 2018, 01:44 PM)
type ipconfig at command prompt

does 192.168.1.1 listed as Default Gateway? if not, then whatever IP shown as your Default Gateway is your admin IP
*
it's not . it's admin IP. now i knew i have to change the IP to a static one instead of Auto Ip.

QUOTE(amp @ Feb 1 2018, 01:52 PM)
https://www.asus.com/my/support/FAQ/1000814/
can be used for any asus router model.

general breakdown:
1. download the correct firmware for your exact model. verify the checksum, sometimes u may have a broken download.
2. download the restore firmware utility.
3. set ur pc ip address.
4. put the router in the rescue mode.
5. restore the firmware using the utility

read the full guide properly.
if it still does not work, tough luck.
*
This guide did helped but when i follow the IP address as stated which is 192.168.1.10, i still can't get into the admin page. I manage to enter the admin control panel only when i alter the ip address to 192.168.1.9 . Once i enter the page, i immediately reboot and downgrade the firmware by download old version in Asus website. After rebooting the router, i was asked again to upgrade the firmware. Pass this stage. But the router is still unable to connect due to the Static IP i configured earlier as 192.168.1.9. In the asus Status , it indicated as Static IP . So when i get back to windows control panel and changing the network adapter, IP4 > Properties > checked Auto IP again, 192.168.1.1 connection to admin panel is locked out again. I received the same old message "Settings have been changed ..) .So i can't get into the admin page to activate the Connection .

QUOTE(mastermindsos @ Feb 1 2018, 01:59 PM)
Agree with this.
If 192.168.1.1 still remain as the gateway, then please clear your browser cache or use the browser incognito/private mode.
*
thanks. i have used CCleaner to do that. Will try out the private mode.
TSmissysleepy
post Feb 2 2018, 01:42 PM

Enthusiast
*****
Senior Member
718 posts

Joined: Mar 2014
update: Now able to enter Asus Admin control panel.
consider this matter close.
thanks

 

Change to:
| Lo-Fi Version
0.0120sec    0.32    5 queries    GZIP Disabled
Time is now: 29th March 2024 - 01:16 PM