Outline ·
[ Standard ] ·
Linear+
Best PSU For Overclocker V2, Which One Is The Best? ^^
|
lichyetan
|
May 2 2007, 04:51 PM
|
|
try coolermaster igreen or acbel lor.. should be cheaper yet quite stable rails... i currently using acbel 550w on my dual core opty... quite stable, previously random shutdown was caused by core temp, initially tought changing psu when facing those random shutdown problem untill i realise tht its core temp tht crash my comp... quite some ppl get tis issue in the bug report session of core temp forum.
This post has been edited by lichyetan: May 2 2007, 04:52 PM
|
|
|
|
|
|
lichyetan
|
May 2 2007, 06:04 PM
|
|
QUOTE(Ryo @ May 2 2007, 05:01 PM) core temp ver. 0.95 right? had that shutdown issue too. switch back to 0.94 and all is good  not sure though, last time using core temp dunno since when the shutdown problem occur, 0.94 or 0.95... now didnt use core temp, use speedfan instead, too bad it just monitor 1 core, btw, to those who experiencing random shutdown problem, if using core temp pls try close it and see whether it is causing troubles, cause sometimes the rails doesnt provide enough ampere also will cause random shut down...
|
|
|
|
|
|
lichyetan
|
Jan 16 2008, 09:54 PM
|
|
Do the corsair TX series reach malaysia d? looks like i might upgrade PSU if wanna use quad core as currently using Acbel iPower Gold 550w which i think ampere are low...
|
|
|
|
|
|
lichyetan
|
Jan 22 2008, 12:33 AM
|
|
QUOTE(ocz @ Jan 21 2008, 08:31 PM) Wow.I dont think that the Acbel E2 510W can support HD3870 as the 12V rails only 18A. Thats the psu i can get ATM. for ur information, E2 510W are dual rail 18A, which means it can support 3870...
|
|
|
|
|
|
lichyetan
|
Apr 21 2008, 07:49 PM
|
|
wondering corsair TX750W vs PCPnP Silencer 750W vs Silverstone ST75ZF, although its not single rail, but combined ampere also are 60A on 12v rails, which one is better? Both Corsair and PCPnP have almost same spec + retail price... but for the Silverstone its RM490 as u all said but without sleeve and older model... http://www.jonnyguru.com/modules.php?name=...=Story3&reid=25http://www.jonnyguru.com/modules.php?name=...=Story4&reid=73http://www.jonnyguru.com/modules.php?name=...=Story4&reid=63its seems the ST75ZF are better performing PSU according to JonnyGuru review... anyone have any idea which PSU are better purchase for now ? This post has been edited by lichyetan: Apr 21 2008, 08:11 PM
|
|
|
|
|
|
lichyetan
|
May 8 2008, 01:53 PM
|
|
http://www.driverheaven.net/reviews.php?re...id=554&pageid=1some reviews for huntkey titan PSU... quite ok though in my opinion...
|
|
|
|
|
|
lichyetan
|
May 12 2008, 01:36 AM
|
|
QUOTE(gamers maniac @ May 11 2008, 06:11 PM) as i said before thest56f have 12v-18amp but the vantec have 12v-22amp. are these output crucial? i read somewhere that some gc requires 20amp to run smoothly.. can explain about this? i think the silverstone's psu will do the job, the total 12v rail ampere for both PSU are at least over 20amp i believe... This post has been edited by lichyetan: May 12 2008, 01:37 AM
|
|
|
|
|
|
lichyetan
|
May 18 2008, 09:18 PM
|
|
QUOTE(dro @ May 18 2008, 07:30 PM) im planning to buy vantec 450wat myself from moderno pc its either dat or acbel e2 510watt d problem is....im not so sure whether its sufficient enuf tis is my halfway done rig: e2160 on p35 ds3l 3sticks of ddr2 667 rams 1 optical 1 soundcard and hopping to get 9600gso or 3850 oso planning to do minor OC but not sure how far it will go as for now my pc restarts at 2.2ghz prolly due to my chapalang 450wat psu *i tink true power 250wat oni i guess* so any suggestion guys? acbel E2 510watt or vantec 450watt? tqs for readin  my friend with acbel e2 510watt setup runs more power consuming spec thn u... so i guess it should be sufficient enough...
|
|
|
|
|
|
lichyetan
|
May 19 2008, 01:39 AM
|
|
QUOTE(dro @ May 19 2008, 01:15 AM) but which shud i opt for? acbel shud provide d power..... but i oso lik d ready sleeved vantec wit better 12V (~20A) save me some money + m planning to upgrade to a better GC...hehe 450watt should be sufficient for ur setup also... i nvr use vantec psu before, so cannot give any advice... mayb u can try and let us knw... haha
|
|
|
|
|
|
lichyetan
|
Jun 2 2008, 11:04 PM
|
|
prefer the corsair's psu due to modular cable + its performing quite well against some higher wattage PSU...
|
|
|
|
|
|
lichyetan
|
Aug 7 2008, 12:45 PM
|
|
tough choice for me, been shortlisting corsair PSU for a while, after reading the review, still dunno which PSU to go for my future upgrade... Corsair TX750W vs Corsair TX650W vs Corsair HX620W...
refering jonny guru review, TX series have some heat issue due to the fan baffle, dunno corsair fixed tht onot ? HX620W seems good from tht review but tis years ago model, although it's tri-rails, but according to jonny guru review, its basically is a single rail design from the circuit analysis...
|
|
|
|
|
|
lichyetan
|
Aug 7 2008, 01:55 PM
|
|
QUOTE(chchyong89 @ Aug 7 2008, 01:36 PM) i just read through jonny guru review.. it just keep praise non top to corsair PSU.. lol.. i more gatal to corsair now  get poisoned.. HX620W made by seasonic, TX didnt read it properly... but its not seasonic
|
|
|
|
|
|
lichyetan
|
Aug 7 2008, 03:37 PM
|
|
QUOTE(a1098113 @ Aug 7 2008, 02:49 PM) i would still prefer zippy or pc PnC psus... or original Seasonic makes. If i had the money that is. wat i dont like about PC PnC silencer is the sleeving, short cables and also 80mm fan.... else i would have consider it... zippy and seasonic availability in malaysia are  ... so end up considering corsair's PSU... but now still happy with my Acbel iPower 550watt although its 12v rail just providing 372watt(31A ) in total... it still can power up my rig with 2 hdd and lotsa fan and wc pump...
|
|
|
|
|
|
lichyetan
|
Aug 7 2008, 10:11 PM
|
|
QUOTE(a1098113 @ Aug 7 2008, 08:34 PM) normally psus do make a difference when u r overclocking at high levels for a long duration of time. At high stress loads too, better psus, withstand it better mayb just providing stable voltages so ur hardware last longer, i remember chapalan PSU killed my Geforce 4 back in the old days after a year of usage... after switching to decent PSU such as Acbel, my hardware last longer ... i also believe it provide more stable OC if u push ur system hard enough with high end hardware due to its stable voltages... and also good PSU with high efficiency help u save $$$ & environment This post has been edited by lichyetan: Aug 7 2008, 10:12 PM
|
|
|
|
|
|
lichyetan
|
Aug 8 2008, 02:39 PM
|
|
QUOTE(chchyong89 @ Aug 8 2008, 10:50 AM) lol.. caplang PSU will kill hardware one mer?? maybe kena thunder strike izzit? u make me worry to my caplang PSU to burn my motherboard..  no, its not thunderstrike, its the voltage ripple,voltage spike such as over voltage or under voltage in long term tht cause the lifespan of the hardware shorter... but not sure tht is the real fact though...
|
|
|
|
|
|
lichyetan
|
Aug 22 2008, 04:47 AM
|
|
got some noob questions here, how do i know if my PSU is limiting my OC, say my Q9550 can stable @ 3.4ghz @ stock volt, but once i OC to 3.7ghz i cant get it stable even though sometimes its does pass all prime and burn in test, it just get random BSOD... and also almost all my OC above 1.3vcore will get random BSOD no matter how i tune the other voltages...
Is My psu limiting me ?
My PSU is Acbel iPower 550w (total combined 12v rails ampere is 31A, 372W)
My system consists of 9 case fans, 1 D4 pump
my Spec is as
Q9550 DFI UT p35 ATI 3870 (Oc'ed to 860,1200) 2x2gb Crucial Ballistx DDR2 800 (@2.2v for ddr2 1080, stable last time on my e8400) now @ 1.8v 1:1 ratio 2 SATA HDD 1 optical disc drives.
This post has been edited by lichyetan: Aug 22 2008, 04:48 AM
|
|
|
|
|
|
lichyetan
|
Aug 22 2008, 09:30 PM
|
|
QUOTE(sniper69 @ Aug 22 2008, 07:15 AM) @lichyetan try remove/unplug one of your HDD, ODD and use single module (RAM), i used to do that way when finding if any PSU related  just tested with newly bought corsair TX750w... no more random bsod...
|
|
|
|
|
|
lichyetan
|
Aug 23 2008, 02:25 AM
|
|
QUOTE(-pWs- @ Aug 22 2008, 11:53 PM) So PSU the culprit? Not Vcore?? -pWs-i was stable with my old psu till 1.3vcore, after tht no matter wat voltage i applied, the pc couldnt stable... stable when unplug 3870, all hdd and optical drive except main hdd... but i can get it stable at stock though, just couldnt OC higher clocks say about 3.5 above without random bsod, now with new PSU, i can run it at 3.8ghz yet with lower vcore, mayb tht Acbel PSU just run out of ampere on the 12v rails...
|
|
|
|
|
|
lichyetan
|
Sep 15 2010, 09:14 AM
|
|
QUOTE(ukimaro @ Aug 27 2010, 01:46 PM) Thanx man ! i really appreciate that . im planning to get i7 930 kingston hyperx 1600mhz ddr3 6GB gtx 460 sli p6x58d-e board will seasonic x750 will be more than enough even though i overclock it to the max possible ? or get a 850w model which isnt out yet for seasonic. what do u think guys ? im afraid in the future i wanna upgrade cards and i don want to change to another psu. thanx ! x750 from seasonic is one of the top model in 750w category...
|
|
|
|
|