ok mah....i used more than 3 biji of enermax too,NoiseTaker,FMA II,Infiniti,all working well and rock solid stable!

actually,i'm not really understand,how come mobo and psu got compatibility problem?

i'm using DFi Infinity Dark Power with Enermax Infiniti 650W,i have no problem,previously using FMA II,also no problem,depend ur luck lo,like Shawty said,ur system will turn on and off after 5 seconds....
mine one is like that,turn on,after 5 seconds,then turn off....wait 3 seconds,then turn on and POST.

the raptorXX is from german if not mistaken,a well known psu brand in western country.

i rememebered the Epsilon has 4 rails and each rail rated 18A.it's ok la,(i used last time),but u gonna pening with its wires....performance is good,running high effeciency and stable ampere per rail.

FMA II really looks like chapalang psu....but it's stable enough

535W has 22A per rail,it has 2 rails whihc is suppose to be 44A but it only has 34As combined.

Make sure u got the DXX version cause it's the latest model of FMA II which can supports nowadays 6+2 pin (this is what we call DXX power) graphic card like x2900.

for more info u can check here
http://www.enermax.com/english/product_Display1.asp?PrID=54

why they wanna do it like that and not sleeve all of them?

maybe la....no care la,as long as it's the good psu,i dont mind it looks messy.

anyone tried Raidmax psu before?who OEM for them?

*Off-topic,where can i find Raidmax casing?

enlight also branded chapalang psu like aku comel and power logic ah?

more is better,but make sure ur casing able to fit it in.

Tagan not bad mah,those mat salleh like to use it for review some hardwares.

anyway,Tagan is the oem for gaygaybyte psu?

Enhance psu is reliable?
i see it's quite cheap and what is the high end series?

mostly 1KW psu with multi rail the ampere on each rail is not that high,IIRC,Enermax Galaxy 1000W only 17A on each rail and it has 5 rails.

for me,i rather it makes it 2 or 3 rails with 30 or more ampere on each rail.

FMA II 535W got 22A on each rails and it's Dxx ready (8 pin pcie connector)

that 2 pin is ground,the 8 pin pcie connector is what we call Dxx.

and if u never plug the another 2 pin in the 2900XT it wont support OC feature IIRC.

nowadays Gc also need 14pin

ya,i think the most is 16pin la,since mobo now also 8 pins,maybe 9 series of nVidia card need 16 pin liao.

WTF....colorful psu....bro shawty,who is the OEM manufacturer for it?

and one thing,all more than 1500W,should be too much liao la

anyway,my 12v is showing 12.32v,why over so much ah? (more than 0.30v)is it dangerous?

This post has been edited by AceCombat: Sep 14 2007, 07:03 PM

sorry,edited.

anyway,bro shawty and other sifusssss.......pls help me to answer my question,thanks.

idle and load almost same,load is 12.30v,bro,if too much what will happened?