Bro what speeds are you getting on your ax73 based on your package?

Anyone know why via wired I get 820 Mbps but using TM router ac1200 I get WiFi of 300 Mbps only?

Because AC1200, you want full speed on wifi. You need to have wifi 6 160mhz router and stand infront of router to test.

Is it possible to use the old hardware as WIFI client?
If yes, which firmware?
WIFI Client = receive WIFI and bridge it to LAN ports.

yes. disable DHCP on it, plug in lan to lan iinm

The other way round. Receive WIFI. Not reveive LAN.

I forget this router have the mode like repeater or not aldy, It seems to have WDS.
Please take note that receive wifi and transmit again will have a very bad experience. Speed slow.

This post has been edited by prokiller1199: Dec 1 2022, 10:49 AM

I think if you follow the main post, you can upgrade it to EU? firmware and you can use the WDS feature from there.

Hi All, just want to confirm. I am planning to get AX55 to to replace UNIFI router to support single storey house for the moment. Don't plan to get deco mesh first, lets see the performance and coverage for single router)

With the one mesh technology, that's mean in the future, i still can get any router(deco/rotuer) with one mesh to serve as another node to expand the coverage ?

This post has been edited by IceBikers: Dec 28 2022, 06:06 PM

onemesh router-to-router feature currently only available with AXE75

onemesh is NOT COMPATIBLE with deco

easymesh is being tested on AX55, but you will need another router that supports easymesh protocol too

This post has been edited by MyProLife: Dec 28 2022, 08:36 PM

omg, thank you for your feedback.
A point I shall reconsider.

Either I get axe75, or Deco mesh.

This post has been edited by IceBikers: Dec 28 2022, 09:33 PM

or if you still interest in getting two AX55 to form a mesh, check out this firmware update (beta testing)

https://community.tp-link.com/en/home/forum/topic/589000

thanks, this is indeed better, where it can be paired with other brand/model that also support easy mesh!

still ethernet backhaul is supported right.

ethernet backhaul is still not implemented yet. only support wireless backhaul

By stock firmware from unifi. Do this router have vlan for maxis or need to flash to EU firmware?

Hi im trying to setup my old tplink archer c5 as a repeater to the new fiberhome SR1041F by unifi, it can detect the root router but theres no option to connect to it after enabling wds and clicking survey

The option to connect is however available to my neighbors router when detected, anyone know how to solve this? could it be I need to change the setting in the new router?

https://pictr.com/images/2023/01/30/ESqJf6.png

At the Advance page I can't find the option to upgrade the firmware on my time router :/

Read the first post again?
This time, I hope you do really read it.

Bro, the answer to your question is in the first post of this thread.
If you find it hard to read, search TIME at first post.