RESULT:

Superpi
1.kevyeoh 14.5s
2.gogo2 14.7s

Thanks to charge-n-go, I got myself a Quadcore Extreme QX6700 2.66MHz.

The rest of the system configuration is as follow:

Gigabyte 965P-DS3 rev1.0 BIOS:F10
Patriot DDR2 1GB x 2 667MHz
Western Digital 500GB 16MB SATAII
Galaxy 7300GT DDR3 128MB
Fortron Epsilon 600W
CoolerMaster Hyper6+

I haven't touch the maximum OC of this Quadcore. Still in the process to determine the limit of this board and Quadcore.

So far, this is what I got:
CPU
3.3GHz at Vcore 1.325V

FSB
300MHz (MCH, FSB + 0.2V)

RAM
375MHz at Vdimm+0.2V

START


Any question, please ask. And if you want me to change anything, I might entertain

Will post final result soon!
FINAL


[attachmentid=225329]

This post has been edited by gogo2: Jun 5 2007, 09:27 AM

Yup, 333MHz works just fine. But I accidentally change it to ratio 6. Hahaha.....let me reboot my PC now.

Super-pi advance a bit.

But let me change the latency. The reason i choose 4:5 because I see 667MHz setting does not boost much of the superpi.

a mere 0.2s.

by the way, here is the latest screenie.

it seems improvement is little. I think need to boost the FSB now



EDITED:
Its weird that Gigabyte indicate its rev1.0 board cannot support 333MHz. Anyway, haven't run Prime yet

EDITED:
Up the FSB = 340 again! CPU is 3.4GHZ

Superpi 15s

This post has been edited by gogo2: Apr 28 2007, 11:20 PM

Not sure about the 1T coz I can't really set it inside the BIOS.

Still can't get below 15s. Already tried low latency but with lower speed.

I think what we need is, low latency high speed RAM couple with high speed CPU.

Anyway, here is the latest OC diary screenie:

Result:

Still at 15s



Ok, I'll try it....

Forgot to take. Wait ya..

Tried with that. The system keep on restart. The system cannot take 350MHz FSB. I think maybe this board is rev1.0. If rev3.3, I believe can go higher. Right now, my board can go below 350. 340 is the one I'm using.

Just bump the speed and super pi. can u give ur result? I'll post it in the first post. Thanks for contributing.

Why wanna sell ds3? is it because its version 1.0?

Superpi go under 15s with higher CPU clock

14.7s....

---

Added on May 1, 2007, 12:58 amThat's the pi number for 3.2GHz. OC more. See what u get...for ur CPU. Coz my CPU, only can get 3.5GHz. Cannot reach 3.6GHz.

This post has been edited by gogo2: May 1 2007, 12:58 AM

You're right. Its all CPU speed. Last time, some Jap OC his P4 to 7GHz to get 25s superpi. so sad

Anyway, check ur result here:
http://forum.lowyat.net/topic/321443

haiz, my mobo revision not same. wat rev is kevyeoh one? mine is 1.0. cannot OC more than 340GHz FSB. so terrible.

My BIOS is F10. According to Gigabyte website, only rev3.3 can support 333MHz fsb. Mine is officially 266MHz. So its logically valid to think that your rev3.3 can OC more than mine

Ok, I'll pump to 1.6 and see whether it can go to 3.5GHz