Rear left bearing gong after 6 yrs +

Anyone can recommend a workshop that know well of Inspira? My foreman cannot find out the steering longgar issue. My car about 8 years and 96k. Not sure it is tie rod or absorber mounting bearing issue.

Change the whole piece including the inner one?

Steering bush dun have original one or 555 right?

Hi, so yesterday I went and changed my gear oil as I ran my car thru some shallow flood area recently. I didn't check what oil they use as It's my regular workshop for engine oil change. Normally I'll do my gear oil at proton sc.

I noticed that the gear shifting is not as smooth as usual especially on the 1st gear, not that bad but just slightly hard vs before, no grinding noise whatsoever tho. Upon checking they us Total Transtec 5 80w90 and upon googling its an GL-5 gear oil.

Upon checking the car actually uses GL-4 oil with lower viscosity and reading thru some forum mention that us shouldn't use a GL-5 oil in a gearbox due to high sulphur content can corrode/ eat up the copper/brass synchro.

Called and asked the shop the say it's fine as it's just a slightly thicker oil.

Is it really fine tho or should I change the gear oil


Thanks in advance

Hi, I have a 1.8 M 2012 Inspira that I want to change the manual transmission oil. No issues, just estimating that it hasnt been changed in like 180k km.

I have the mitsubishi oil already, do i need to change anything else? Gasket, seal or pan or other such things? IIRC manual no transmission oil filter.

First time changing MTF so unfamiliar with the consumables. Appreciate any tips or info, TQVM!