Received ZTE H267A today. What I did after the installer completed the installation.

This ZTE default IP address is 192.168.1.1 so your own router need to be in other segment ie 192.168.0.1/255.255.255.0

At Internet > WAN > DSL tab > DSL Connection
1. Create new item (Internet bridge VLAN)
- Connection name: BR_VLAN_500
- DSL Transfer mode: PTM
- Type: Bridge Connection
- VLAN: On
- VLAN ID: 500
- Apply

2. PPPoE set to Off

3. Click VLAN Trunk tab
- LAN1 set to On
- Supported VLAN number: 1
- VLAN ID1: 500
- PVID: N/A
- Apply

4. Once done connect own router WAN port to ZTE LAN1. HyppTV connect to ZTE default LAN4

Optional>>
5. If you want to pass the HyppTV to own router then
- At DSL connection > BR_VLAN_600 set to On (default is On)

6. At VLAN Trunk
- LAN1 set to On
- Supported VLAN number: 2
- VLAN ID1: 500
- VLAN ID2: 600
- PVID: N/A
- Apply

2 minor observations. I will try to fix it when have time.
1. ZTE system time not sync with time server. Suspect it can't pick-up internet traffic
2. Internet LED is off. Should be related to above

This post has been edited by patricktoh: May 31 2019, 08:03 PM

parking.

is this setting for HSBB or SUBB (phone line to zte) ?

Mine is HSBB. Default for VDSL phone line. I reckon you don't touch this settings.

@patricktoh thanks. Well explained and works great on ZTE H267A Modem + ASUS RT-AC5300 Router

I made the mistake of changing the Port Binding, until you mentioned the VLAN Trunk tab.

This post has been edited by twinshell: Nov 17 2017, 03:56 PM

Glad to hear it helps I could see you invested in muscular router. I am only using AC3200.

Park

I got alcatel lucent modem, is the huawei one better?

I am planning to request to change the modem.

Alcatel-Lucent is better, its 1gbps.

Huawei is 100mpbs only.

TM said different brand given according to different equipment used in different area. Cant choose.

BTW, anyone has Alcatel Lucent admin login?

I'm not sure about distribute modem.

I also got Alcatel model, but 3 years ago I wished to access to Alcatel configuration but no luck, until now I still try access to it.

After few research I founded they using telnet or ssh or whatever it's using command line. There is no web GUI.

Did you figure out how to do it with CLI?

None, 0 chance.

That's suck.
I asked TM Tech for the login, they refused to give to me. If you have friend workin in TM, maybe can get the access.

I have been given this router as well and it sucks. I can only get about 5mbps in my room. Modem in living room.

I am staying in an apartment and should be using vdsl2. Can I use the above settings if i buy a router?

Why not? Try invest slight more for a good wifi router. What's your budget like? Alternatively buy a 3 pins plug wifi extender.

thank you for the reply.

I will try to change my wireless adaptor first. currently using a 300mbps wireless adaptor. Will get a dual band one and try to connect to the 5ghz band and test it out first.

My phone is connected to the 5ghz band and it can achieve full speeds in the same room.

an update. bought tp link t4u adaptor and i am getting full speeds connected to the 5ghz band now.

So i guess no need to change router.

I followed your steps but still unable to use it as bridge to my e4200 with dd-wrt. Any idea how?

0. Have you rechecked all the steps I stated? Standard question

1. What's the WAN (internet) settings in e4200 dd-wrt?

2. You need to configure PPPoE in dd-wrt with UniFI login details (btw I do not have dd-wrt but setting should be more or less the same)
- Connection type = PPPoE
- User name = xxxx@unifi (you unifi login)
- Password = xxxxx (you need to check from UniFi installation sheet or ask TM 100)
- Connection mode = always on / keep alive
- keep the rest default

3. My instruction was based on assumption that the user knows how to configure own router