Hi,This is my third case mod
Link for first mod:http://www.overclock.net/t/1619098/case-mo...u#post_25729818
For 2nd :http://www.overclock.net/t/1624567/sponsor...nor-complete/20

For this time i try to mod based on osmium colour but its hard to get dark chrome colour so i just opt for what i got

Before That i would really like to thank you to all those sponsor and trust for my case mod and first sponsored project


Thermaltake = http://www.thermaltake.com/


Here the Spec For This Case Mod

Thermaltake:
View 71TG




P1 Pacific Black Pump


Pacific Flow Indicator 2

Pacific Temperature Sensor



Pacific W4 Water Block


RL11 Reservoir



TT Sleeve Mod Cable Pack

TT PREMIUM Plus FAN 3 PACK RGB


V Tubler PETG TUBE 12mm

Thermaltake Bending KIt 12mm

Thermaltake Dye And Coolant


Some TT Fitting 90 Degree Dual OD,Compression Fitting,Angle Fitting,And Extender



M-pro New fitting





Other parts
Intel Core i7 6800k
Strix X99


Design

Will Be upload

Thanks[/quote]

Testing new thermaltake Dye

Spraying The Frame And Part

Front Panel i cut some part for the mod







Top Panel

Also Spray some res and pump part
need to sand it first since its pretty glossy

Finish product since its pretty hard to find people who can do chrome plating i just use some aerosol spray looks pretty good but the spray its pretty fragile

forrrow

because this case mod base on chrome so i try to mirror finish all my part

sanding
you can see how rough it is





done sanding with 360 grit

polishing with meguiar plastx

custom reservoir since i dont have access to cnc so i just user laser cut machine and will do 3 layer front res and floor

even inside i will sand it through to get mirror finish

Done polish some part



tt W4 Waterblock

MODDED tt w4

done Back Frame

[/URL]

Starting to make my 3 layer Front custom res


im using white rubber ring


Rear Nut




front screw



Finish Product

Dissamble my waterblock to polish


done sanding with 2000grit


my ram block which i polish






SRY FOR LOW QUALITY PIC MY CAMERA BODY GOT PROBLEM

Custom Floor Channel


transparent silicone ring



you can see im polishing inside out to get mirror finish

also im modding my own gpu waterblock

disassembly


since some of the part got frosted finish so i start sanding it with 400 grit and finish all of it with 2000 grit


done polish and some mod if you realize what it is



im changing the original plate to transparent acrylic and and all the bezel and polishing all by hand just not satifies with the screw need to use 12-13mm but i only got 16mm should bought more

klu nk redoing.....@ nk more blink blink chrome try DIY kit chrome

keras cikit harga ... rm680 ..xpi best part.. plastik kaa tube kaa jadi chrome



https://www.facebook.com/EurekaChrome/


https://www.youtube.com/watch?v=c9-wFTUhpT4