Not sure if this is a problem......

My readings under smart guardian during idle for ATX+12V is 11.96V.
But whenever i perform stress test (super pi or stress prime), the ATX+12V jumps to 12.03V. Even vcore jumps from 1.24v to 1.4v.
As i recall, amd64 readings for the above normally stays the same or drop slightly.... not go up.

Me still noob at C2D.....
For amd64 can disable the 'cool n quiet' function. Is there anything i should disable in bios to make the mobo or cpu to run at max performance/voltage?
Currently running my E6420 in bios vcore @ 1.4V at 3.2ghz

I think should be rather safe or perhaps even recommended to run @ 2.2V.
http://www.nintek.com.au/x/scripts/prodVie...?idproduct=5150

Mine currently running like this since yesterday...... plus many hours of intensive games:


Btw... im still not convinced that it's a D9 afterall...... cant seem to hit 1000 even at 5-5-5 @ 2.2V. Scared to go above that voltage. Settings must be wrong somewhere ...... More testing needed.

Currently on 0418....... but beware of this bios. Yesterday got some raid problems.
But solved already.




This post has been edited by borneo: Apr 30 2007, 06:36 PM