Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 DFI Infinity 965-S Disscussion, Talk About How to Tweak

views
     
anangryorc
post May 12 2007, 01:11 PM

On my way
****
Senior Member
597 posts

Joined: May 2006


Actually this board loves supertalent RAMs. I think you can try reinstall LAN driver, reinstall windows, or even zero filling your hard drive then start over again before going for RMA, my good old rig (socket A, which now im still using) have the similar prob before.

Supertalent ddr667 on dfi p965-s
anangryorc
post May 31 2007, 06:01 PM

On my way
****
Senior Member
597 posts

Joined: May 2006


If you are going to oc better wait for 6x50 series, with g0 stepping, 1.2v can hit 500x7 done by coolaler. =.="

This post has been edited by anangryorc: May 31 2007, 06:01 PM
anangryorc
post Jun 2 2007, 07:41 PM

On my way
****
Senior Member
597 posts

Joined: May 2006


Just set up the rig, initially everything was good. Memtest a few hours @ stock vcore E6420 @ 3.2ghz, ddr800 everything auto. After that, I changed the dram timings to 4-4-3-auto in bios and 2.2v bios, supertalent t800ux2gc4, memtest was good and i rebooted. Upon rebooting, the mobo gives a error one long beep and nothing else happens. So I went clearing bios and boot up fine with default settings. Then i hot reboot again the same thing happened again, one long beep, nothing else. SO i turned off a while then turn on from cold boot, everything ok, then hot reboot same thing happened. And now, cleared bios, cold boot, the mobo gives a long beep, nothing happens, even clearing the bios doesnt do. Any advice? bios corrupted?

btw: soft reset doesnt seems to work for me (stock bios), hold insert+reboot, have to manually reset, so will this damage the bios chip?

This post has been edited by anangryorc: Jun 2 2007, 07:49 PM
anangryorc
post Jun 24 2007, 10:47 PM

On my way
****
Senior Member
597 posts

Joined: May 2006


Anyone tried higher strap oc results? (modded bios)
coz mine currently walled at ~450 fsb.

btw i'm impressed with this board able to give massive bandwidth when set to fast, my everest read is 9k mb/s on ddr900, which is nice.

And one occasion I forgot to change the fsb ratio when I was changing bios settings upon clearing cmos, the ram was running at ddr1368 booted, quite shocking.

This post has been edited by anangryorc: Jun 24 2007, 10:50 PM
anangryorc
post Jul 20 2007, 05:51 PM

On my way
****
Senior Member
597 posts

Joined: May 2006


How do you know its the first batch?
i know mine is printed U7150 on the sticker on the pcie slot, think is early batch coz no need up nb voltage can do 450 fsb ^^

This post has been edited by anangryorc: Jul 20 2007, 05:53 PM

 

Change to:
| Lo-Fi Version
0.0292sec    0.94    7 queries    GZIP Disabled
Time is now: 1st December 2025 - 09:10 AM