I have dji phantom 3 standard and i wonder why the drone shaking while hovering in the air. the whole drone seems like vibrating.

The last time i use my drone i try to autoland then its shaking before landing and the drone land badly luckily the drone is fine and since it wasnt that high before drop. Then i afraid i try to fly my drone yesterday i just hand catch it rather than auto land

Sometimes also when i try to take off it shows compass stuck on dji app then i have to try again until it able to take off. Hope sifu2 can help

This post has been edited by koidekuchi13: Oct 18 2017, 07:39 PM

Bump

Bumpp

Have u calibrated the IMU and compass?

I did before. IMU calibrated. And before take off i always calibrate the compass

This post has been edited by koidekuchi13: Oct 19 2017, 10:10 PM

Bump

reset and do compass calibration la...

see if it does improves or not...


plus..the vibration maybe coming from unbalanced prop blade?

another thing is... before you fly, how many sattelite did u got locked?

Roughly around 12

12 should be pretty good already...

have u tried flying with your tablet/phone/pad in flight mode?

Well since i change my phone seems i havent did that. Is it recommended to do so?that might be the cause? Not the motors? For your reference my situation almost similar like this video https://youtu.be/eCURpEY2Rk4

yeah.. try use the phone in flight mode first...



if the vibration is mechanical, u can feel it during idle (props spinning on the floor)

Just got back from flyin my drone. The drone still shaking, already did a flight mode. I bring up much higher and it was fine but suddenly the drone went crazy, when i push forward the drone goin left, when i push backward the drone goin right. Idk whats wrong, i try to bring it down to land but its doesnt work. Afterall i autoland it, glad that method works or else idk what to do i was panic. And i catch it with hand.

This post has been edited by koidekuchi13: Oct 20 2017, 06:52 PM

try to look for firmware upgrade asap...

thats how drone fly away happens..


unstable possibly satellite lock or firmware itself have issue...

im glad i autoland the drone ASAP. Seems like theres no firmware upg. Thus i think since dji change their maps from google maps to HERE maps the firmware seems get much worse. Any idea how to downgrade instead?

This post has been edited by koidekuchi13: Oct 20 2017, 11:38 PM

U do compass calibration before each flight? read somewhere it's not advisable unless you're flying at different place from home.

Well i did that since i use my drone for my video job. Been using it for various places

better u register into dji dedicated forum instead for this...


since i got little experience on dji product...


(*lol..using other brand drone)

What brand?

yuneec typhoon 4k