Outline ·
[ Standard ] ·
Linear+
Technical LIVE after Death...Revival SPELL?, Revived=80 3ROD Again=9 R3RODR=7
|
TSsilencer
|
Aug 3 2007, 03:46 AM
|
|
QUOTE(rezalida @ Aug 3 2007, 03:18 AM) silencer, the method is not that hard at all.. the hardest part for me to make the custom heat pipe from the xtra added 12v fan to blow an cold air to the gpu..  I,m using a card box to accomplish that. I will try my best to post my picture but since I didn't have any camera with me for the moment it not possible to do so. As for the 12V fan modification I just did it the same way like the tutorial from the 1st link that you gave. Just to give you an an info about the custom heat pipe. most of the mod out there just add the xtra fan without the custom heat pipe.. so I think the air flow from the fan are spread all over inside the unit. The purpose of this heat pipe is to make sure all the air from the xtra 12v fan being direct to the GPU heat sink following the path below the dvdrom. Even the solution that ms try to do by adding the xtra heatsink, I'm personally think that it would not enough to draw all the heat from that monster GPU.. and I agreed with tot that this xtra fan is a must to make the heat from the GPU being blow out from the unit. and I one of the successful survivor by doing this method.. wait for some picture .. I will try my best..  thnx dude...most of us cant wait for it  ....never done the electrical part soldering....most of the time using it for speaker cable....
|
|
|
|
|
|
TSsilencer
|
Aug 6 2007, 02:20 AM
|
|
QUOTE(rezalida @ Aug 5 2007, 11:56 PM) buleh punya tadahal, to anybody which want me to do this just PM me ok!  Rezalid..i add your name in the first thread..so easier for anyone to PM u if they encounter 3rod again after x-clamp that requires fan modding.... QUOTE(rezalida @ Aug 6 2007, 01:26 AM) I can try to help.. what happen to yours console now? I believe his 360 requires a fan mode....wont hurt for trying as its dead already after xclamp.... This post has been edited by silencer: Aug 6 2007, 02:25 AM
|
|
|
|
|
|
TSsilencer
|
Aug 6 2007, 04:44 PM
|
|
w00t tot...i hope u dont mind that i add u in my first page for fan modding too...great job dude
|
|
|
|
|
|
TSsilencer
|
Aug 7 2007, 11:23 AM
|
|
QUOTE(tot31 @ Aug 7 2007, 10:31 AM) My advice bro, don't wait until it hits again, just do it. Prevention is better than cure. Same goes to any X360 than haven't been hit by 3ROD, better do all of this mods as all of X360 are like time bombs. tot..kind of scaredlah if my xbox is still working ok...but definitely will opt for the fan mod if it goes downhill again... This post has been edited by silencer: Aug 7 2007, 11:25 AM
|
|
|
|
|
|
TSsilencer
|
Aug 7 2007, 04:45 PM
|
|
QUOTE(izaman @ Aug 7 2007, 01:46 PM) i played oblivion last week. yeah, old games....but my achievement is already 930GS. tend to finish this game. suddenly my x360 hang with the screeching sound. i reset it and try to boot but....3ROD. after that i put my x360 horizontally and it do not happen again. waaa. nearly make my heart jatuh. hahaha. anybody experience this after x-clamp fix? Hmmm..so u have done the x-clamp fix....mine is Ok with no problem at all after the x-clamp eventhough i put it vertically...but u r working ok now....isnt it....by the way..mana pergi..lama tak nampak....???? After getting married...senyap je......
|
|
|
|
|
|
TSsilencer
|
Aug 7 2007, 08:22 PM
|
|
QUOTE(DjiNn @ Aug 7 2007, 07:49 PM) reza... now you have to turn on the volume loud.. .because your machine sounds like jet engine already.. kkakak engine loud..still ok..engine break down..lagi naya....
|
|
|
|
|
|
TSsilencer
|
Aug 8 2007, 07:31 PM
|
|
QUOTE(tailgunner @ Aug 8 2007, 07:28 PM) guys is that worth it if i send my 360 back to SG for repair? will they accept JP set? I might be wrong here...normally sg will only accept Asian SG version..maybe u can send e-mail to them..they might be willing to repair it at an extra cost..by the way..why not trying the fan mode first.....i believe it is much cheaper....
|
|
|
|
|
|
TSsilencer
|
Aug 8 2007, 07:44 PM
|
|
QUOTE(tailgunner @ Aug 8 2007, 07:38 PM)  the mother board is rosak already ...it wont show any message on tv no output display at all. itulah....pandai2 lagi repair sendiri..using hotgun somemore.....its ok..DJinn shop i ready to accept your "plastic" cash.... DJinn..u should consult your credit card banker..if they do provide free interest payment for 12 or 24 mnths....as most banker do provide the svc...
|
|
|
|
|
|
TSsilencer
|
Aug 9 2007, 09:27 PM
|
|
QUOTE(edoras81 @ Aug 9 2007, 09:10 PM) I dont trust myself with doing those repairs even if its just to tighten screw. I dont want to make things worst. I'm gonna get a pro to do it i.e. someone on the forums hopefully. Advise u to PM rezalid as he encountered the same symptom too after x-clamp and then, the problem ws rectified after after he did the fan mod...he is a nice guy too.... This post has been edited by silencer: Aug 9 2007, 09:58 PM
|
|
|
|
|
|
TSsilencer
|
Aug 10 2007, 05:57 PM
|
|
QUOTE(DjiNn @ Aug 10 2007, 05:51 PM) man~. I just hate so many 3 ROD issue... hiah~. please contact one of my partner in the shop.. I'm off today . anyway, today just finish install a 40mm fan for the cpu heatsink.. and 12v stock fan for GPU.. man~ didn't know it was that noisy..  but is indeed 30 percent cooler then before... got to test run it hehehe I guess u've better get a confirmation when is the new model with the new chip will be released in Spore... Thumbs up for your first fan mod.....
|
|
|
|
|
|
TSsilencer
|
Aug 10 2007, 10:20 PM
|
|
QUOTE(rezalida @ Aug 10 2007, 10:12 PM) yo bro tailgunner and prominen.. UPGM  Rezalid..PM me the cost too..plan todo it sometimes this month..before bioshock coming out..thanks
|
|
|
|
|
|
TSsilencer
|
Aug 13 2007, 04:54 PM
|
|
QUOTE(-= Virgil =- @ Aug 13 2007, 11:48 AM) I think you should just send the console to Singapore for warranty.. Who knows, you might get back a refurbished one with extra heatsinks in it and maybe, a 65nm chip along with it  yup....u never know your luck..even with the extra heatsink and epoxy..its like buying the new batch....
|
|
|
|
|
|
TSsilencer
|
Aug 13 2007, 07:40 PM
|
|
QUOTE(schrodinger_cat @ Aug 13 2007, 06:35 PM) the 3ROD popped up again on my console at 4.45 just now. I left the power brick on for an hour and fired it again, yes, the console worked again. I'm so confused....it wanna die or not? Every time i look at it, it's like your 105-year-old grandma going for stroke any moment. Every time it 3ROD, the screen shows nothing at all? What's the problem actually? Hmmmm....might be overheated....why don u ask the xpert here... This post has been edited by silencer: Aug 13 2007, 07:42 PM
|
|
|
|
|
|
TSsilencer
|
Aug 13 2007, 11:21 PM
|
|
QUOTE(schrodinger_cat @ Aug 13 2007, 10:05 PM) Hmm...one thing for sure is that the electric bill is paid every month. N not much apparatus are being used...so i think there's enough juice to blow the x360...sigh....the 3RODs were just so inconsistent... why don u try switching it on at other place...who knows that tailgunner might be rite about it....
|
|
|
|
|
|
TSsilencer
|
Aug 14 2007, 12:45 AM
|
|
kenobi...since u r buying from bernard..why dont u get the reconfirmation on how much that he is charging for warranty claims....tell him that u want it back ASAP...dont worry...bernard svc is highly reliable too... Regarding the warranty charges..i have no clue on how much that it will cost u...but bear in mind that x-clamp svc will also cost u around 100 somethin too... I advise u to plug out the xbox now...before the problem is getting worse..like 1 rod...and made up your mind wether to opt for x-clamp svc or warranty claims....jst rtying to help....THNX
This post has been edited by silencer: Aug 14 2007, 12:46 AM
|
|
|
|
|
|
TSsilencer
|
Aug 14 2007, 02:11 AM
|
|
QUOTE(Hamster X @ Aug 14 2007, 01:55 AM) Revived-3Rod Again-Revived Again QUOTE(edoras81 @ Aug 14 2007, 02:01 AM) Good news, will be collecting my 360 from tot31 today he has managed to fix the 2rod issue, moreover he has put additional mods on it including spoilers, 20 inch rims and more. thanks tot31. Good Job Master tot.....  amd welcum back to my pasar malam fren..edoras...
|
|
|
|
|
|
TSsilencer
|
Aug 14 2007, 07:42 PM
|
|
Like most people predicted.....it is predicted will only available for batch 0728 and/or made on August this year....but there is still no official about it...and I believe the falcon chip is not applicable to the 360n that r made before August.
|
|
|
|
|
|
TSsilencer
|
Aug 15 2007, 01:26 AM
|
|
QUOTE(ghostdevice @ Aug 15 2007, 01:00 AM) last week i had multiple hang occasion ...since Rezalid came up with his NOS mod I decided to send mine to him...n the result is REZASPANDOLOUS ahahah he also let me to watch how he revived the console via web cam with witnessed by few ppl LIVE...so I recommend if any one of u who have 3rod after x-clamp get your fix from Reza  hahahaha..thumbs up for his first online project...woi ..ghost...hantar senyap2....
|
|
|
|
|
|
TSsilencer
|
Aug 17 2007, 03:40 PM
|
|
Guys...for post xclamp fix..go for fan modding...rrefer to my first post..rezalid and tot r always available....
|
|
|
|
|