anyone noticed that after 10k service changed to SN0W-20 engine oil, the engine noise become louder? i use petron 95
Honda City Gen 6.0/6.1 V09, looking for new TS
Honda City Gen 6.0/6.1 V09, looking for new TS
|
|
Sep 24 2017, 02:16 PM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
anyone noticed that after 10k service changed to SN0W-20 engine oil, the engine noise become louder? i use petron 95
|
|
|
|
|
|
Sep 30 2017, 06:03 PM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
to pre-facelift v spec user, does the fog lamp only can be turned ON when head lamp also ON?
|
|
|
Oct 1 2017, 03:11 AM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 1 2017, 11:05 AM
Return to original view | Post
#4
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
Honda City GM6 E Spec to V spec conversion. Honda Genuine Access V Spec Fog Lamp & V Spec Steering Switch Control.
https://youtu.be/RARVbb6dLEc https://youtu.be/Uce9lODtIG8 |
|
|
Oct 1 2017, 01:31 PM
Return to original view | Post
#5
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 1 2017, 01:33 PM
Return to original view | Post
#6
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
|
|
|
Oct 1 2017, 10:11 PM
Return to original view | Post
#7
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
QUOTE(babylon52281 @ Oct 1 2017, 10:02 PM) Kaw kaw Vspec alredi. Ur signature below should change to "Honda City GM6 V Spec Modern Steel" ya, but luckily no any noticeable scratches so far after this installationBut looking at the amount of dashboard removal needed, I wont dare do same unless risk scratching dash plastic. |
|
|
Oct 1 2017, 10:12 PM
Return to original view | Post
#8
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 2 2017, 08:00 AM
Return to original view | Post
#9
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 2 2017, 09:09 PM
Return to original view | Post
#10
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 4 2017, 09:56 PM
Return to original view | Post
#11
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
QUOTE(baiseliange @ Oct 4 2017, 06:52 PM) [attachmentid=9201028] suppose is reserve camera harness, maybe u got installed tv bypass harness beforeAnyone know that the cable connected to this socket in city pre-fl is what cable? was plan to install reverse cam myself but find out at the HU socket there ald had a cable there... https://item.taobao.com/item.htm?spm=a230r....ucket=10#detail This post has been edited by gsan: Oct 4 2017, 09:57 PM |
|
|
Oct 5 2017, 09:32 PM
Return to original view | Post
#12
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 6 2017, 04:14 PM
Return to original view | Post
#13
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
|
|
|
Oct 7 2017, 09:52 AM
Return to original view | Post
#14
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 8 2017, 10:11 AM
Return to original view | Post
#15
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 8 2017, 11:12 AM
Return to original view | Post
#16
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
something to share on pre-fl city
default e spec comes with the bluetooth white wire at the socket below clockspring, located at left 3. this wire suppose connect to pin 12 of canbus socket, but since e spec dont have canbus on head unit, honda connect this wire to pin 23 on power socket of head unit. thus, the e spec bluetooth HFT button has the same function as the additional 2 button on v spec steering. for those who want to modify to full v spec steering control switch included voice function (except cruise control), you need to move the bluetooth white wire from left 3 to left 4, then add one additional wire on left 3 location, connect it to pin 12 of canbus socket. https://youtu.be/hBbUAotb19o This post has been edited by gsan: Oct 8 2017, 11:14 AM |
|
|
Oct 9 2017, 08:35 AM
Return to original view | Post
#17
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 9 2017, 04:15 PM
Return to original view | Post
#18
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 9 2017, 09:42 PM
Return to original view | Post
#19
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
|
Oct 9 2017, 10:27 PM
Return to original view | Post
#20
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,471 posts Joined: Jan 2003 |
|
|
Topic ClosedOptions
|
| Change to: | 0.1026sec
0.60
7 queries
GZIP Disabled
Time is now: 23rd December 2025 - 02:00 PM |