Outline ·
[ Standard ] ·
Linear+
LYN Perodua Axia Club V7, Malaysia's No.1 EEV Now Even Smarter!!!
Ciypher
|
Sep 14 2019, 02:51 PM
|
Getting Started
|
QUOTE(Jaschong @ Sep 14 2019, 11:36 AM) Thanks. Not sure if could be repaired. Will go to a tyre shop. Just afraid of getting ripped of. At least I know the est price now. But the product description says its a just a temporary solution Do internal patch for permanent repair.
|
|
|
|
Zot
|
Sep 14 2019, 03:11 PM
|
|
QUOTE(Jaschong @ Sep 14 2019, 11:36 AM) Thanks. Not sure if could be repaired. Will go to a tyre shop. Just afraid of getting ripped of. At least I know the est price now. But the product description says its a just a temporary solution Temp solution? But many shops just use the same thing though. Even my tire go to workshop also like that. I think charge only RM5. Last time used to be only RM4. If you buy you just save probably RM15 for additional puncture in future. So, easy way is just to go to repair shop No problem after fix. No leakage even. Look at condition. If slit puncture then cannot use. Only hole type puncture. This post has been edited by Zot: Sep 14 2019, 03:19 PM
|
|
|
|
Jayi
|
Sep 14 2019, 05:02 PM
|
|
QUOTE(Jaschong @ Sep 14 2019, 11:36 AM) Thanks. Not sure if could be repaired. Will go to a tyre shop. Just afraid of getting ripped of. At least I know the est price now. But the product description says its a just a temporary solution Unless it got punctured on side wall then different story. Your case can be repair, small matter
|
|
|
|
tribal94
|
Sep 14 2019, 07:54 PM
|
Getting Started
|
I pull the boot release lever on my Axia G pre-facelift but the boot doesn't open. Need to use key on the boot itself to open.
Anyone else faced this problem?
|
|
|
|
infra79
|
Sep 15 2019, 03:25 PM
|
New Member
|
QUOTE(tribal94 @ Sep 14 2019, 07:54 PM) I pull the boot release lever on my Axia G pre-facelift but the boot doesn't open. Need to use key on the boot itself to open. Anyone else faced this problem? Simple matter, your next service just tell them n they will adjist it. Dat was what happened to me 2.5yrs ago too. After dat til now not prob.
|
|
|
|
infra79
|
Sep 15 2019, 03:29 PM
|
New Member
|
QUOTE(Jaschong @ Sep 14 2019, 11:36 AM) Thanks. Not sure if could be repaired. Will go to a tyre shop. Just afraid of getting ripped of. At least I know the est price now. But the product description says its a just a temporary solution It can be patched which cost rm10 in ss2/seapark area so not sure which pj area u referring too. Ss3 cost rm8. Mayb some smaller area rm7. In melaka near town area some shops still charge rm5 which i know 😁
|
|
|
|
ahboon76
|
Sep 15 2019, 04:20 PM
|
Getting Started
|
QUOTE(Jaschong @ Sep 14 2019, 02:22 AM) Hi guys, My Axia tyre got punctured by a screw and I'm currently using the spare tyre. What should I do next? Go to a tyre shop to get it replaced or P2? Any place to recommend in pj? Sunwaymas near aman suria got many tyre shop or taman mayang old LIM KOK WING college also many shop. alternatively go MRDIY buy a can of tyre sealant. I use on my brother MG3. so far so good. already 3mth no complaint from him. This post has been edited by ahboon76: Sep 15 2019, 04:24 PM
|
|
|
|
dares
|
Sep 16 2019, 11:08 AM
|
|
QUOTE(Jaschong @ Sep 14 2019, 11:36 AM) Thanks. Not sure if could be repaired. Will go to a tyre shop. Just afraid of getting ripped of. At least I know the est price now. But the product description says its a just a temporary solution That pucnture location.....repair at your own risk This post has been edited by dares: Sep 16 2019, 11:08 AM
|
|
|
|
Zot
|
Sep 16 2019, 01:26 PM
|
|
QUOTE(dares @ Sep 16 2019, 11:08 AM) That pucnture location.....repair at your own risk This is what the diagram showed but if you go to workshop, they will just repair is. Mine is at same puncture location and use the same plug and it is fine. Now more than a year already. No pressure loss due to puncture.
|
|
|
|
GamerONE P
|
Sep 16 2019, 04:49 PM
|
New Member
|
Hi Sifus. I need some advice and feedback from here. I'm thinking of changing new rims for my Axia (M) and I like the look of those neat looking that sits slightly out from the fenders. What would be the optimal rim offset and width (J) so that the new ones won't hit my fenders? I have stock suspensions. 😊
|
|
|
|
GamerONE P
|
Sep 16 2019, 05:54 PM
|
New Member
|
QUOTE(TAN WENG @ Nov 18 2017, 05:02 PM) 14-17km/l only.mostly 15km/l with slight jam Yups. But only during outstation drives. 20km/l confirm.
|
|
|
|
ckloke2
|
Sep 16 2019, 11:15 PM
|
Getting Started
|
QUOTE(chienoz @ Aug 29 2019, 04:40 PM) Oh okay... I'm still waiting for my car.. 2/3 weeks time... Might be you will install first.. hahahahah Have you installed central locking? Where?
|
|
|
|
crazy91
|
Sep 17 2019, 11:10 AM
|
New Member
|
Hi any bro can share the experience or comment after install throttle controller
|
|
|
|
stagrun
|
Sep 17 2019, 05:02 PM
|
New Member
|
Hi bros and sis and sifus,
I noticed my steering a bit loose-like, where sometimes it feels like no feedback. Sent to SC, they said the steering is OK. When simulate avoiding emergency brake car, my car can feel wobbly due to light steering wheel.
Anyone faced similar situation as me before?
Thank you in advance.
|
|
|
|
fiqie
|
Sep 17 2019, 05:37 PM
|
Getting Started
|
QUOTE(GamerONE @ Sep 16 2019, 04:49 PM) Hi Sifus. I need some advice and feedback from here. I'm thinking of changing new rims for my Axia (M) and I like the look of those neat looking that sits slightly out from the fenders. What would be the optimal rim offset and width (J) so that the new ones won't hit my fenders? I have stock suspensions. 😊 im currently using 15 inch 32offset 7jj, tyre 195/50/15 toyo ne3 slightly out from body. stock spring. tyre and fender gap around 4 fingers.
|
|
|
|
Zot
|
Sep 18 2019, 08:08 AM
|
|
QUOTE(stagrun @ Sep 17 2019, 05:02 PM) Hi bros and sis and sifus, I noticed my steering a bit loose-like, where sometimes it feels like no feedback. Sent to SC, they said the steering is OK. When simulate avoiding emergency brake car, my car can feel wobbly due to light steering wheel. Anyone faced similar situation as me before? Thank you in advance. Most importantly, may I asked if you are new to the car or have been using for some time but suddenly felt the steering different from before. Otherwise your description is subjective. Different person may describe it differently.
|
|
|
|
stagrun
|
Sep 18 2019, 10:18 AM
|
New Member
|
QUOTE(Zot @ Sep 18 2019, 09:08 AM) Most importantly, may I asked if you are new to the car or have been using for some time but suddenly felt the steering different from before. Otherwise your description is subjective. Different person may describe it differently. Zot, Apologise for my insufficient details. Been driving my Axia for a lil bit more than 2 years. Tested this morning to turn the steering left and right few times, can feel like the car not moving in the direction of the steering turn at the time.
|
|
|
|
Zot
|
Sep 18 2019, 10:43 AM
|
|
QUOTE(stagrun @ Sep 18 2019, 10:18 AM) Zot, Apologise for my insufficient details. Been driving my Axia for a lil bit more than 2 years. Tested this morning to turn the steering left and right few times, can feel like the car not moving in the direction of the steering turn at the time. Maybe you should go to another SC. There must be something not right since you have already accustomed to car behavior I do not experience what you've described.
|
|
|
|
keong1163
|
Sep 20 2019, 08:44 AM
|
New Member
|
Today 10am lauching for new Axia 2019
|
|
|
|
hasif63
|
Sep 20 2019, 07:03 PM
|
Getting Started
|
hahaha. Top spec axia loses leather seat, but still uses the same rim as first facelift. SE though gets myvi 1.3 rims (which to my eyes looks hella good on axias)
But I want ASA2.0 and VSC. lucky new buyers.
Wish those can be retrofitted.
Still looking for bezza's gear and centre console
/end rant
|
|
|
|