owikh84



goldfries | Ryzen 7 1700 | 4Ghz | ASRock X370 Gaming | Frostflow+ 240

Validation : https://valid.x86.fr/k3m1d8

*voltage using off-set mode, I'm still fine-tuning it.

UPDATE : I managed to run DDR4-3333 on my rig!

Are those sammy b as well sir? If bootable everytime then congratz...

From what I read, yes they are.

Yes every time also can boot.

Now stress testing.

My 4Ghz speed can't pass RealBench 15 minute stress test. I no happy.

I reached 14 minutes mark and most. Still tweaking.

Nice! Glad to see asrock is doin well on ram, especially on non taichi board. Gonna take quite a no of volt to survive long stress test.

Gonna try out cb r15 tonite. Hopefully there will be some breakthrough...

Pass stress test already. Yay!

Took quite some time to fiddle around. Basically fixed voltage is a NO GO. I had to go with Off-set mode.

@goldfries

Can i have d memtweak it n cpu memory tab for 3333mhz ram for reference sir. Wanna see wjere went wrong for my case.

Some update with the temp.



81C on load for Cinebench. Wouldn't go longer. lol

Damn, for that voltage, the temperature is actually very good.

Extreme LLC is on. VCore was set to 1.45V. Noctua NH-D15S definitely hitting the limit.

Your Cinebench old version or something?

At 1716 it's certainly not 3Ghz, that's about 3.9Ghz range.

MemTweakIT + CPU Z SPD tab? OK

I get later.

Its 4Ghz. Cinebench doesn't update overclock speed.

Oh yes it does.

Mine shows exact overclocked speed.



You'll need to tweak it further, that score is low for 4Ghz.

INFO : the image is not my latest score, I got 1785 for 4Ghz.

Was just testing the temperature.

Don't know how to make it show current speed. Been like that since the first time.

yes sir, thx in adv...

btw this is d max d chip can go, vcore maxed out @ 1.55v in BIOS, lol...



ah_khoo | Ryzen R3 1200 | 4.05 GHz with 1.50v | B350 Tomahawk | AuraFlow 240

Wah so high.

I like Ryzen 3 1200, the last one I tested can do 3.8Ghz with just 1.2vcore.

Your RAM timing very nice. 14-14-14-34 is tight, mine can't reach that. I think CL 14 can but the rest can't do. 14-15-15-37 is not possible, and also doesn't show gain in CBR15.

Yup, r3 is like most of its bigger brothers, maxed out around 3.9ghz for 24/7, any higher need those 1800x which binned higher with much bigger price tag.

Tightening d timing since nothing much can be done for higher ram freq. Still abit disappointed that i cant do better than 3200... Perhaps need tonnes of reading n time to fiddle around.

1800X where got nice? LOL. I got the 1800X, the 20 degree temperature off-set kacau OCing like silly.

That aside 1800X can't OC that much either, I like my 1700 a lot more. A LOT. The 1800X I don't bother to OC, waste time. I leave it on my work rig.

I feel that the Ryzen setup, each setup - processor + board alone, the variance is huge.

Not all X370 are equal, you test out shitty stuff like Biostar X370GT5 and see, vomit blood when it comes to overclocking.