You are looking at either GT-AC5300 or RT-AC86U which has the Broadcom BCM4366E wireless NIC. AC5300 has tri bands versus AC86U which has dual bands. Otherwise it looks about the same specs wise.

If you want serious gaming stability and prepared to get a bit technical, Mikrotik/UBNT is cheaper on a similar setup. If you want a simplified setup and management then its any vendor gaming routers with faster CPU and gaming priority QOS.

Even 300Mbps wireless connection on 5GHz is more than enough for gaming and it does not drop on 5GHz since relatively no interference. Of course wired is the best for gaming always.

This post has been edited by XPS: Mar 11 2018, 07:10 PM

So now you already know which to buy between the two and is quite satisfactory.. Else, you can always spring for the beasty Asus ROG Rapture GT-AC5300.... Sure zero complaints then..


This post has been edited by voncrane: Mar 11 2018, 07:17 PM

Great anyone here can share setting for ASUS 2Ghz and 5Ghz for AC68U....

Asus ROG Rapture GT-AC5300 is really good but I think is overkill for normal users its designed for gamers only AC86U should be ok.

Turning off Air Fairness is probably the main thing. Game priority QOS. WTFast turned off as gaming latency is better without it (unless for those days latency is off the charts WTFast will help). Most of the other settings keep defaults recommended by AiProtection scan. Do not run the new router and your old Asus in AiMesh mode, its unstable.

That should get you running fast. Other settings you can tweak once you get to understand the AC86U better.

What router are you using ? I'm using AC87U was thinking of getting AC86U if it has a lot of improvement....

AC86U local set

anybody have experience changing or porting from maxis fiber to unifi?

do we cut the maxis line first or install unifi first, scared my jalan no more port available.

[quote=birain,Mar 11 2018, 09:26 PM]
anybody have experience changing or porting from maxis fiber to unifi?

do we cut the maxis line first or install unifi first, scared my jalan no more port available.

[/quote
Can install unifi 1st, after tat only terminate maxis

Need to apply TM first.. Once approved and confirmed installation date and time with installer.. Then go terminate Maxis.

Unifi down?

Iptv working but internet cannot access. Lol. Even ping to any of the tm/google/open dns failed.

anyone do network configuration here? need help on configuring from the crappy netis to a new dlink router. with $$ of course. thanks!

No, all good here Subang area. Maybe your area?

I will give you the advice for free, courtesy of bro patricktoh, from this thread:https://forum.lowyat.net/topic/4452440/+20

And further discussions from this thread about the same topic: https://forum.lowyat.net/topic/4488408

It’s not the same, but something similar.

Received ZTE H267A today. What I did after the installer completed the installation.

At Internet > WAN > DSL tab > DSL Connection
1. Create new item (Internet bridge VLAN)
- Connection name: BR_VLAN_500
- DSL Transfer mode: PTM
- VLAN: On
- VLAN ID: 500
- Apply

2. PPPoE set to Off

3. Click VLAN Trunk tab
- LAN1 set to On
- Supported VLAN number: 1
- VLAN ID1: 500
- PVID: N/A
- Apply

4. Once done connect own router WAN port to ZTE LAN1. HyppTV connect to ZTE default LAN4

Optional>>
5. If you want to pass the HyppTV to own router then
- At DSL connection > BR_VLAN_600 set to On (default is On)

6. At VLAN Trunk
- LAN1 set to On
- Supported VLAN number: 2
- VLAN ID1: 500
- VLAN ID2: 600
- PVID: N/A
- Apply

2 minor observations. I will try to fix it when have time. smile.gif
1. ZTE system time not sync with time server. Suspect it can't pick-up internet traffic
2. Internet LED is off. Should be related to above

This post has been edited by SilentVampire: Mar 11 2018, 10:49 PM

This is embarassing. My mum forgot to bayar bill. XD

Wow nice bro, ill give it a try ya! many thanks.

trying to understand the above ( am no network guy ) will the netis be used still as a modem, or replaced fully with the new modem router? its a AC750 ADSL2+ by dlink.

Not mine bro, but bro patricktoh is the one that came up with this. I just pass along his knowledge to you, so all credit belongs to him.

Anyway bro, if you mean this model: http://www.dlink.com.my/product/dsl-2877al...s-modem-router/

Then you can disregard my earlier post as your modem router is capabke of handling VDSL without using the netis as a bridge, which is what the steps above are trying to do. It should be straightforward for your case.

This post has been edited by SilentVampire: Mar 11 2018, 11:11 PM

See what u place use if fible set it at Ethernet WAN,if VDSL is PTM WAN, ADSL is DSL WAN

tq tq bro, will give it a shot tommorow

Ask her use auto debit, link credit card to her unifi account, then can save rm2 every month plus never will forgot pay bill.

is there any problem with the unfi.com.my? I couldn't login into my account dashboard. keep singing me off whenever i click on the the dashboard option.