Currently testing it as my daily router.

Anything specific you would like to know?

How about the deco m5 wifi range,and it performance is you connect alot of devices?,it is can be use as Range extender, AP and router?
it is worth it?

It is mesh networking so it is some sort of combination of all 3 you mentioned.

As for router, it cannot do VLAN tagging so in order to use that with Unifi, you need to add another router as VLAN bridge

by the way any experts here use the features Parental control?
i have tested by restricted time access from 11pm to 5am for certain devices
but when on the said devices at 7am, browser display black page
any ideal?

so you has to use it as AP instead for unifi?, the price on Online for 3 deco m5 it cost RM1,399,but there is discount so it only cost RM1,179
And for single pack RM425 does it worth?,BTW cant wait for your full review

This post has been edited by Doraku: Jan 10 2018, 11:04 AM

Is the clock at your router working properly?

If it is not, enable time sync and select the correct time zone.

yes selected correct time zone. +8

Yes, less than 30 users

I'm goin nuts troubleshooting the TPlink NC230 IP camera. the camera became offline right after 8am ++. Therefore I need to switch off and ON again to make it work and it last until 745-815 am roughly. Soon after, before 9 am the camera went offline again.

The thing is I have another unit of NC230 connected with the same router AC3150. the rest are ok.

Try updating the firmware, resetting it and make sure your wireless signal is good and not through any wireless repeater. Try diagnosing it with wires connection.

Worst to worst, RMA it. TP-Link is always generous for RMA and you can just ship it to their Lowyat service center.

Just RMA it bro, TP Link is usually good with warranty issues and they have good customer service.

then shld be ok using Tpkink

Will recommend you this modem router as you are using Streamyx: http://www.lazada.com.my/d-link-ac1200-2x9...d6568pta5O&mp=1

It supports VDSL and fiber as well for future use when and if you are able to upgrade to Unifi or Maxis fibre.

Pls. recommend me a router for printing wireless.

firmware is the latest, reapply the firmware failed because it detect the same firmware version. reset also the same thing. I swap the other NC230 to that location, weird thing is, the swap unit also showed the same symptom. Right now it happen daily exactly between 745-845 am.

Connected to my archer AC3150 which kinda descent unit. wifi signal received from the cam is minimum 85%.

Tried also wifi channel via inssider, not dense and polluted, the channel I'm using is 11 and I'm the only one. Once connected it is perfectly fine.

I will try again to relocate the camera, it may or may not caused by unknown inteference

Any router can do that, if it has a print server function. TP-Link routers are good for that as well.

See here: http://www.tp-link.com/us/faq-415.html

Note is for printing wirelessly only. So TL-WR841N ok aaah?

It is possible that there's some interference at that place. Could be someone using the Microwave oven at the time or simply anything operating at 2.4Ghz.

My recent interference experience is caused by some cheap China baby monitor.

I suggest you to try channel 1 and see if it is better even if other devices are on channel 1.

The best case solution is to go powerline but that would require additional investment which may not be ideal.

The cheaper models do not support print server.

Get Archer C1200.

Please google your printer model first as certain models are problematic .

thanks for the insight, I also suspect there's a some kinda interference and I realized it happened daily within this 2 weeks. it happened daily around 745-845 am. I have the av500 Nano, worst case I may have to use it which I'm not prefer to use it due to unnecessary additional wiring to my CAM and to the powerline.

update: reboot the AC3150 through cloud just now, the NC230 still failed to showed live video, camera apps showed offline, but my AC3150 telling me it is online. rest of the cam are ok

it seems to be that problem started from 845 am onwards. I went home at 6 or 615pm switch OFF and ON again works fine till roughly 830 or 845 am

This post has been edited by eddyann: Jan 12 2018, 04:02 PM