Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed New Topic New Poll

Outline · [ Standard ] · Linear+

> WTS Aquartz Car Coating, Car Coating Accessories

paikut
post Apr 27 2017, 12:17 AM, updated 7y ago

Casual
***
Junior Member
469 posts

Joined: Mar 2005
From: Earth



[B]Aquartz Korea Automotive Diamond Coating

Package includes: A-Quartz Chemical 30ml , Coating Sponge, Coating Fabric Sheet, Microfiber towel

Price: Rm350

Dealing method: COD or Bank in

Location of seller: Kota Kinabalu Sabah

Contact method/details: 0182008038 whatsapp

Age of item: new

]Aquartz Nano Tech Ultimate Shine Coating

Suitable to apply at body paint, wheel and Rim, head lamp, plastic, bumper and etc.
ALL SURFACE COATING!
Content: SIO2
Category: This is a IMPROVEMENT VERSION of legendary coating application product since the first launch of hard coating in this world detailing industry. Manufacturer is one of the first and pioneer in the world who manufacturer the coating chemical into car automotive field. Even some of the coating in the market who label as "Made in Korea" are from them.
Hardness maximum: Acceptable best near to 6H or 7H.
What from TAC Korea for you: The TAC VIP car sticker to stick within your car.

Benefit of Aquartz:
Specially formulated for all surfaces on car.(The only product range in market for coating detailing)
Provide long lasting shine with a layer of glossy reflection on top of car.
This coating formed a hardness of 6H withstanding heats, brake dust and abrasions.
Protects coated surface from ageing, oxidization


Product details of Car Coating DIY Set A-quartz

Application
1.
Shake the bottle for 20 seconds before use.
2.
Soak the coating onto the application sponge or dry application tissue/towel.
3.
Apply small section at a time by dragging the coating horizontally (Left to Right) once and vertically (Top to Bottom) once. Make sure the coating covers every part of the surface.
4.
Immediately, use a microfiber cloth to buff the coated surface,do not pressurize the buffing process. Buff off completely
until there is no visible striking or lining. (If you have hard time buffing off the striking and lining, recoat the particular surface again with step 3)
5.
Wait for a minimum of 4 hours for the coating to cure and bond with your surface; for best performance, allowing the
coating to cure for 72 hours.
6.
Washable after 7 days.
7.
If you wish to apply a second layer coat, Repeat Step 3 to 4 after 4 hours.




Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

This post has been edited by paikut: May 1 2017, 09:23 PM

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0132sec    0.22    6 queries    GZIP Disabled
Time is now: 28th March 2024 - 09:49 PM