Last time i run my PC6400 D9GKX from mjoe 1080 with 3-4-4-4 timing 2.4vDimm.. but not prime stable la.

This post has been edited by yehlai: Mar 15 2007, 07:02 PM

is 2.3v/2.4v safe for long term?

eg: if i run mine 2.3v @ 1ghz 4-4-4-10.

2.4v safe if have good cooling.
Last time i only run for benchmarking, the chips really hot..

hahah
this is at stock vdimm
only 2.2

thats y special

24/7 using 1000mhz 4-4-4-12 2.2vdimm.
2.3 vdimm either 1200mhz cl5 or 800 cl3 1t

mine running 2.3v 1ghz 4-4-4-10 and i have copper HS on my rams attached. so is it cool to run 24/7?

If u put HS then its hard to know ur RAM chips run hot or not.
Cooling fan is good enuf.

Did you tried DDR1400?Timing??

that means revolting
no way

also take note.
most mobo cant go above 1300mhz

---

Added on March 15, 2007, 10:40 pmstable at max 1084mhz 4-4-4-12 2t 2.2vdimm

the problem at running at this speed
i cant sync it with the fsb.
if unlink its ok.

p.s. this option only on 680/650 mobo. i think

in sync benching is much faster. real time windows load faster. aquamark in sync is faster.
1:1 with fsb.

http://www.neoseeker.com/Articles/Hardware..._tracer_pc8000/

This post has been edited by cstkl1: Mar 15 2007, 10:41 PM

RAM Size : 2048 MB
RAM Freq : 332.5 MHz
RAM Type : DDR2-SDRAM Dual Channel
RAM Ratio : 1:2
RAM Timings : 5-5-5-15


My ram is 1GB 667MHZ X 2...But why it shows the frequency is 332.5???

ish.
its ddr 2.
so times 2 larr.

y is mine showing 500?
times 2 = 1000mhz.

share some result pls.. wht RAM can reach tht kinda speed??
xtreem 1000MHz?

ya interest to know which ram can go for 1400
so far i know is 1300++ with overvlting

This post has been edited by taxidoor: Mar 16 2007, 03:34 PM

crucial now changing new pcd that make the chip run well on low voltage..even my ballistix tracer run 400Mhz with 4-4-4-9 at 1.86v only (suppose to be 2.2v)...

diff u can see at the edge of the old pcb n the new one is it got word "levin"

er mine is levin...

Sorry just want to know... why at the SPD page, Timing Table u got different speed?
1 u got; 4-4-4-12@400Mhz and second u got 5-5-5-15@500Mhz...is't normal?

i dont remember my spd but i think it got 2 timings too. The first one with tighter timing but lower freq, the 2nd one loose timing with higher freq.

afaik, lower timing is better than higher freq...

right?

This post has been edited by irwan6179: Apr 17 2007, 12:03 AM

Actually, in my cpuz...i aslo got 2 different speed..is't normal?

lol i bought same batch of ram same model as cstkl1 and it did can reach that timing,but too bad i killed 1 stick of it lol,now need rma

advised to run this with a external fan cooling
timing so far pretty stable tested with this
800mhz cl3 2.3v
1000 cl4 2.2v ...set ure own sub timings
1200 cl5 2.3v

best bandwidth on the evga mobo was at 950mhz 4-3-4-10 2.25v

woah... custom made cooling from fridge spare parts...?