Hehe... I mean does this padavan firmware perform better than Xiaomi own?

nvm found the solution dy

just follow the guides here.

enable entware (makesure you got existing usb drive formated to ext3)
https://bitbucket.org/padavan/rt-n56u/wiki/...onfigureEntware

then follow the guides here.
https://blog.sunriseydy.top/daily/padavan-ipv6/
just use google translate.

Hi just checking. Are you still running this router with padavan on repeater mode? Can know how's the speed performance for device to device transfer through 5G WiFi? Will have 2 laptop and 1 phone connected to the repeated WiFi network for local file transfer, thinking about the performance for local transfer. Possible to hit like 40-50MB/s?

By local I mean wifi between 2 devices connected to the same network.

My config is planned to be:

Existing 100M broadband with 300N WiFi router from the house owner - > mi router 3 with padavan - > setup to bridge to existing WiFi-N then broadcast AC866/1200 - > my own devices (2 phones & 2 PC) on Wi-Fi

I am planning to use it for local file transfer between my own devices via WiFi so trying to ask see anyone tested the config with file transfer over WiFi with mi router 3 on padavan.

The thread is saying if Lan 100mbps it will cap the Internet speed but I'm not doing it with Lan so it's different topic.