Alpha Wolf's Router Configuration, Customisation and Repair Services in Malaysia based in PJ/KL


Router Debrick Service
Service price upon successful debrick / unbrick: RM 30
This afforable price has remained the same fixed figure throughout many years of service. Your satisfaction is guaranteed by ZERO service fees if the debrick is unsuccessful. You only need to provide for transport or courier of the device.

Do you have a router that fails to start no matter what and how much you try? Instead of paying more for a new router or purchasing an interfacing device and going though the learning curve of debricking, let me do it for you with the qualified tools and experience. I debrick TP-Link, Asus, Linksys, Buffalo, and more. Please specify your model number and hardware version upon request. Debricking can be done within the same day with prior arrangement. Therefore, you could drop off and pick up your device on the same day. I perform a multi-level approach which includes Serial and JTAG to secure successful debricks.

What is a bricked router? How does it happen? And how can it be debrick / unbrick?

» Click to show Spoiler - click again to hide... «

A device that can no longer function because of a firmware corruption or boot failure is termed "bricked", reducing its usefulness to that of a piece of brick or paperweight. Routers get bricked for a variety of reasons, including flashing to an incorrect custom firmware, a firmware upgrade process that was interrupted or encountered a failure, and under rarer circumstances, serious misconfiguration or corruption of the stored firmware over time. A bricked device cannot be recovered using the hardware reset button. Recovery requires internal hardware access through either serial console or JTAG.

When is a debrick / unbrick unsuccessful?

» Click to show Spoiler - click again to hide... «

I have close to a 100% record for successfully debricking all routers sent to me. However, there are instances where a brick is beyond recovery due to hardware failure where recovery would incur more expensive service and hardware component charges. Such damages are commonly due to lightning strikes or overheating.

How can I prevent my router from bricking again?

» Click to show Spoiler - click again to hide... «

Do not upgrade your firmware over a wireless connection. Use an Ethernet cable with a secure and stable connection instead. Never interrupt the upgrading process even when the process appears to have completed. Giving it a few more minutes wouldn't hurt and could save you from a bricked router. Always double and triple check to make sure that the upgrade firmware or custom firmware that you wish to flash your router to is compatible with your router's model and hardware revision. Ensure that you can sustain a continuous power supply for at least the next 15 minutes for the flashing process. Avoid flashing during a thunder storm where power trips are more likely to occur.

Router Custom Firmware Flashing Service
Service price: RM 30

Want to add a whole lot more powerful software and configuration features to your router but you are afraid that you might brick your router? Let me do it for you. I flash DD-WRT (BS main builds, Kong builds), Tomato (Shibby, Toastman, Merlin, TomatoUSB), OpenWRT (Gargoyle) firmwares onto TP-Link, Asus, Linksys, Buffalo routers, and more depending on compatibility. Please specify your model number and hardware version upon request. We can discuss over the features you want and decide upon the best custom firmware for you.


Examples:
Xiaomi Mi WiFi Router 3 is a very affordable AC wireless router but its firmware does not support VLAN tagging therefore you cannot use to to replace your existing fiber router. It can be flashed to Padavan to support VLAN.



Network Router Setup, Configuration, Repair
Contact with your request for more information and price quote.



Location: SS2, Petaling Jaya
Device dropoff/pickup: SS2 Mall, there will be ample space right along the road beside this deserted mall for you to conveniently stall your vehicle. Exact location here on Google Maps: https://goo.gl/maps/48gFe
Postage: Add RM10 (for serviced item return postage)
Contact: +6011-3988-two-210 (WhatsApp available)




Original thread that got archived: https://forum.lowyat.net/index.php?showtopic=1498281


Thread Thumbnail: http://nerdspace.drmodding.com/wp-content/...ck_router-1.jpg

This post has been edited by Alpha Wolf: Feb 5 2018, 08:58 AM

This is awesome. I will find you if i brick my router ...

last year i threw away my TP-Link after brick .. duh ..

Huawei E5776 Bootloader corrupted, can u fix it?

Nope, sorry, try a mobile service vendor instead.

Hey Boss, Netgear R7000 bricked can you repair... it works but unable to access it web interface

Yes can!

ok noted with thanks, will come back to you probably in 2 weeks time. Out of town now.

ok noted, travel safe ya

Hi Boss, I am back. Please PM your address how to proceed and other particulars. I would like to flash the Netgear R7000 to Xvortex, do able? Thanks.

Welcome back, Xwrt-Vortex is a port of Asuswrt-Merlin and does officially support R7000, and yes, it can be arranged. I'll contact you further via PM. Thanks.

waaa. nice.. i will gather all my bricked router to u,. since most of that problem cause from unstable firmware.

I can assure you it works. He restore life back to my netgear r7000 - it works and it alive....lol.. speedy services as well despite i have poslaju over the ditch.
Thank you, Bro Alpha Wolf

Thank you!

Do you can repair ADSL modem?
Suspect hitting by Lightning.
Symptom :
i) ADSL not up
ii) Auto Restart.

Normally when a device is hit by lightning, there would be damage along the PCB traces itself.

Good service, nice guy... recommended 👍

Thank you!

Passed my dead Asus router in the morning, revived in the evening.
What's more he walked out in the rain to meet me.
Excellent service.
Thank you.

Thank you for your patronage. I had my umbrella.

Can de-brick Dlink DIR-868L? Last time I tried custom firmware (I think its ddwrt?) and cannot get out from recovery mode. Searched online that I needed to reset from pcb