Hi,This is my second case mod

For this time i try to mod based on For Honor Games

Before That i would really like to thank you to all those sponsor and trust for my case mod and first sponsored project

Thermaltake = http://www.thermaltakeusa.com/
ADATA =http://www.adata.com
XPG From ADATA =http://www.xpg.com/en/



Here the Spec For This Case Mod

Thermaltake:
Core X71



P1 Pacific Black Pump


Pacific Flow Indicator


R240 Radiator


Pacific W3 Water Block


Pacific V-GTX10 Series




Asrock H270 Performance


Design

i've never been good for 3d such as sketchup or anything like that so i can only my design by my work in real life

Thanks

TT Sleeve Mod Cable Pack


Commander F6 RGB


Toughpower Grand RGB Series 750


TT PREMIUM FAN 3 PACK RGB


V Tubler PETG TUBE 16mm


Thermaltake Bending KIt

Thermaltake Yellow And Black Coolant


Some TT Fitting 90 Degree Dual OD,Compression Fitting,Angle Fitting,And Extender



From Adata
XPG Z1 DDR4 3000MHZ 16GB KIT


SU800 AND XPG930 SSD



Other parts
Intel Core i7 7700K

my first work is measuring case size for side,front and motherboard tray since i try to custom all the part

core x71 i think can fit 420 rad but im going to use 240 rad only



measuring top panel thinking to create custom top with acrylic material


i think im going to let it maintain with stock look for back io panel


since i dont want to risk any motherboard im using biostar tpower i45 motherboard to measure tray and offset for my part


i think can fit 2 330ml reservoir but im going to use 220 res only

Front Panel part which i cut with laser cut machine




Done cut with laser and now assembly some part to see which 1 missing





top panel which i trace with laser and need to remove 1 by 1 before spray

remove all standard fan which came with x71


front panel switch button,its easy to remove only 2 screw used to mount it


cutting front panel because i will fully custom with it only need the frame

sanding frame and side panel with orbital sanding 320grit
.

wet sanding with 800 grit to get smoother finish


using tack cloth to remove all dust,oil

ready my acrylic part




my spray gear and paint


using alloy red paint

undercoat silver to get the colour right


thinning the paint to 2:1 ratio with thinner


Undercoat Process for all part

Frame

Side Panel 1



Bottom Panel/Rad Panel


Pcie Slot




Front Panel Acrylic

done spray red alloy colour for frame




not really good finishing i hope i got a room for spray





front panel part









pcie slot with pearl gold

Finish Part

Top part


Front Panel


now i start to knit front panel with hemp cord


slowly progress



half done


done tighten all rope

Done front panel


inside front panel


inside ssd box

Thank to asrock for this nice motherboard

H270 performance






it look fancy eventhough its just H series

my custom reservoir stand based on samurai sword stand

Im done with my build i hope all of you can give honest opinion for my case mod





sponsor for my case mod XPG by adata,Asrock,Thermaltake

Temp Reader with power button


SSD Box

Graphic Backplate





Reflection For Fan


Asrock H270

Watercooling Loop








Res