You're wrong ! C70 heat rejection is better than C50. Check the spec and test the film you will know.
Darker film only help in reducing glare. PM shaguarbb for more details because he is selling Huper Optik.

---

Added on October 13, 2012, 9:07 pmThe voucher is marketing tools don't fool by them! Both also home brand.
The JPJ ruling is FWS needs >70%, all side and BWS >50%

Cant help you on 3M price, you need to survey around =)

This post has been edited by lonely143: Oct 13 2012, 09:07 PM

Have you test both film before? Use the VLT vs IRR to compare =)
TSER apply on architectural purpose

---

Added on October 14, 2012, 2:16 amWOW 15 years good !

This post has been edited by lonely143: Oct 14 2012, 02:16 AM

Yes you are right, the IRR is mrkt gimmick nowadays.
Yes according to IWFA, the film performance is measure in wavelength, SHGC vs TSER
Its hard to explain here cause is too technical

But when you test C50 and C70, you will find that C70 will works better.
Its weird but it is truth.

---

Added on October 14, 2012, 9:38 pmGood, who say metalized film have problem wit smart tag?

This post has been edited by lonely143: Oct 14 2012, 09:38 PM

Yes

read from here

http://forum.lowyat.net/topic/418792/+1540

If your budget is around that, I would say YES ! Oh ya your car fall under standard saloon category

This post has been edited by lonely143: Oct 18 2012, 04:53 PM

Do you mind tell me your budget and your main concern?
Who is driving car? Long distance or short distance?

[quote=jiaenn83,Oct 18 2012, 09:06 PM]
I want good tinting instead of d budget.. I think both brands d price r quite similar..

I drive long distance most of d time

quote=lonely143,Oct 18 2012, 06:42 PM]
Do you mind tell me your budget and your main concern?
Who is driving car? Long distance or short distance?

[/quote]

[/quote]

For long distance, your FWS film must be high range.

VKOOL ELITE
Visible Light Transmittance 73.20%
Visible Light Reflectance 8.00%
Ultra-Violet Radiation Rejection 99.00%
Shading Coefficient 0.50
Infra-Red Heat Rejection 94.00%
TSER 55%

Source http://www.v-kool.com.my/Content/automotiv...t-catalogue.htm

SECH 60
Visible Light Transmittance 59%
Visible Light Reflectance 8.00%
Ultra-Violet Radiation Rejection 99.00%
Shading Coefficient 0.54
Infra-Red Heat Rejection 83.00%
TSER - 54%

Source http://www.smartwindow.com.my/

If you compare both spec, I believe V-Kool Elite has the better performance and I believe the
cost is slightly higher compare to the SECH 60. Both of the film is made from metal as material.

Oh ya, 4mil and 6mil doesn't make so much different, sometimes the film too thick will create wave on your windows after few years (cause by the adhesive of the film)
A minimum of 4Mil thick film is already consider a safety film

This post has been edited by lonely143: Oct 18 2012, 10:27 PM

[quote=overfloe,Oct 19 2012, 08:39 AM]TSER.. this is why popular brands like vkool, 3m and huper optic are popular.. although price may be high, they do work as intended. Of course, they do have cheaper tints that are so-so quality (like 3m FX series).

Most cheap tints will not publish the TSER figures. Try to get tint with at least 50% TSER..

[/quote]

+1 not they dont want to publish their TSER but they dont have the spec !
as most of the spec is fake -.-

Beside that you should look into VLT vs Shading Coefficient vs TSER as well =)

For example,

1.0 represent normal glass
0.1 represent wall
http://en.wikipedia.org/wiki/Shading_coefficient

---

Added on October 19, 2012, 9:02 am[quote=shaguarbb,Oct 19 2012, 08:34 AM]

[/quote]
If ur budget more than 1k then just go for V-kool Elite, 3M Crystalline, or Huper Optik..... no other choice
If u want the real feel can welcome to my shop to feel it

[/quote]

Yes I think you should visit shop to feel the heat demo =)

This post has been edited by lonely143: Oct 19 2012, 09:06 AM

Instead of asking here why don't you visit their shop nearby you?
A simple google can get their website and shop location
http://www.agard.com.my/v1/location.htm

Bro, refer back the warranty card and cash bill

---

Added on October 19, 2012, 6:23 pmBasically VLT around 70%-60% with 50-60% TSER is consider good film.
Also look for Shading Coefficient around 0.4-0.6

This post has been edited by lonely143: Oct 19 2012, 06:23 PM

There is something wrong about Agard and Aircool website.
They never show the film technology and how it was made.

If you do not need so fancy tint, you can consider their RM600 promo for security.

o.O find me website link -.- equivalent to V-Kool? must be kidding

---

Added on October 23, 2012, 2:52 pmMost of the accessories shop can fit your requirement =)
Mostly cost about RM 400-500 and it could be even cheaper

This post has been edited by lonely143: Oct 23 2012, 02:52 PM

You call this official website? OMG must be kidding me.
This is HOME BRAND, subsidiaries under COOL WORLD

HOME BRAND means they buy tint from Korea and China,
bring in Malaysia and Re Name.

"Cause I read some blogs they say they are very happy with it and that it's as powerful as vKool"

That's statement seems not right, I'm not rude, I am just explaining.
It's not really about the brand that im selling.
If you say 3M is equivalent to VKool I still can accept but I don't even know where RhinoPro origin

Bro its like INTERNATIONAL vs LOCAL

It normal =) refer here, http://www.windowfilmdepot.com/IWFA%20Inst...20Standards.pdf
IWFA (International Windows Film Association) is well know association in US.

Normally it takes 1-2 month to cure, depends on the glass surface =)

http://www.johnsonwindowfilms.com/RG.php this one?
by the way where did you get it? It maybe come from RAYTECH too

Go search around at Groupon, I Deals or I Love Discount
You can get a average film with that bugdet =)

http://www.groupon.my/

http://www.ilovediscounts.my/klang-valley/

http://www.mydeal.com.my/deals/kuala-lumpur

---

Added on October 25, 2012, 6:21 pmRefer here for Huper Optik aka Smart Window http://forum.lowyat.net/topic/2374620

---

Added on October 25, 2012, 6:24 pmRefer here for Huper Optik aka Smart Window http://forum.lowyat.net/topic/2374620

I would choose 3M than Huper because I always insist that metal has better rejection than ceramic.
The only problem with the 3M is they got too many fake product in market as they have too many dealer.
The film will start discoloration after few years.

The heat rejection is overall good =)

---

Added on October 25, 2012, 6:25 pmRefer here for Huper Optik aka Smart Window http://forum.lowyat.net/topic/2374620

---

Added on October 25, 2012, 6:27 pmA minimum thickness for safety film is 4Mil, above 8Mil is Security film which have bullet resistant.
A normal solar control film thickness is around 1.5mil - 3mil

Contact them for further details http://www.raytech.com.my/

This post has been edited by lonely143: Oct 25 2012, 06:29 PM

The thickness is nothing to shout about, because every brand can give you 4-10mil.
The heat rejection is more important.
The test the film in few ways

Reflectance
Absorption
Rejection

Few simple tools to test the film such as "killer machine" "infra red lamp" "heat digitizer"

Make sure the film is INTERNATIONAL brand and not HOME brand. Why?
Because the film is good and they were able to sell it internationally.

Most of supplier nowadays get film from China, Korea and etc. Bring into Msia and rebrand it.
Its actually very easy to identify which are HOME or INTERNATIONAL.
At their official website, it always end up with "com.my".
Try remove the "my", and you can still access to that website,
its truly a INTERNATIONAL brand. Most of the HOME brand give you fake info especially on their spec.

---

Added on October 26, 2012, 11:36 amAgree. Check few thing before you decide to put c40

1. If the supplier willing to cover the summon then you have no worries.
2. If your car interior is dark, then it will look darker too.


This post has been edited by lonely143: Oct 26 2012, 11:36 AM

Yes it about RM3000++ haha but the film is good =)