Hi..

Noted, thanks. Will try on that.

By the way, one more question, my setup is as below:-
eth0 - switch0.110, switch0.120, switch0.130
eth1 - pppoe1
eth2 - pppoe2
eth3 - switch0.110, switch0.120, switch0.130
eth4 - not configured anything

I tried configuring eth4 to assign IP by DHCP without any vlan. But, it doesn't seem to assign an address and I can't access internet.

I also tried being on a static address 10.20.100.100 as my ER-X gateway address is on .251, and I'm plugged in to port eth0 and yet no access to internet.
But, at same time, I have traffic coming in from eth3 via vlan 110, 120 & 130 without any problem accessing internet.

Am I missing out something here?

yeah the erx is gone, i wanna let go of my uap-ac-lite-us @ rm360 incl shiping eventually also. you fellas are welcome to pm me for arrangements also.

unit is perfectly fine. i just boycott ubnt from here on. so yes, im selling while dissing the company, negative marketing.

Sorry guys, could I check with you,
anyone have port forwarding issue with TM unifi and edge router x?

I follow the step,
its easy to configure, but none of the port forwarding is working.

Hi, i need some help with setting up Edge Router X for unifi and hypptv. I got this from a friend and was trying to play around with it. I followed your guide and i managed to get pppoe set up on eth0, providing internet to switchports eth1-4 using basic setup. However i can't seem to set vlan on eth1, error saying switchport in use.

I did try setting up again with the steps provided

"e) click 'configure this section' on (Optional) Secondary LAN port (eth2)
f) uncheck 'Enable the DHCP server"

Hypptv was running but I'm not getting internet on other switch ports although pppoe is connected.

My idea is to use this router as a main router for internet and hypptv, and use it as a dhcp server while connecting an access point to it to provide wireless to wifi devices.

Appreciate your help guys I'm still pretty new to this. Trying to move out from using the off the shelf consumer routers.

USG can work with Unifi as well ?  Is it the same ?

Thank you

sorry,
its my mistake,
LAN interface has to add switch.0 as well, else port forwarding wont work.
btw,

could I ask 1 more question?
anyone here has ever try to use 5fixed ip unifi with edge router?

I manage to add in all 5 public ip into single wan..

but.. of cos , all in / out traffic is using first public IP,
any idea how to set 1 LAN ip (example 192.168.1.10) to use my 2nd public IP ?

I already have 1 server(192.168.1.2) using port 80,
but I have another webserver (192.168.1.10) need to use port 80 as well...

stucking here..

haiz..

not load balancing.

unifi 100mbps business package is dynamic IP,
in order to get fixed IP u need to top up RM300/mth then they will assign 5 public ip for you.

so my company permanently get public IP 175.xx.xxx.81 to 175.xx.xxx.85 from TM for this 100mbps account.

so now I want to assign public IP
175.xx.xxx.81:80 to 192.168.1.2:80
175.xx.xx.82:80 to 192.168.1.3:80
any idea how to do add in all 5 public ip into  the router ?

nope, that ip 175.xx.xx.81 is permanently assign to me until I terminate my unifi, so even restart the ip would not change.

not for VPN purpose,
it just I have 2 webservers (192.168.1.2, and 192.168.1.3) both using port 80
so I want to do port forward which ip 175.xx.xx.81:80 forward to 192.168.1.2:80 and 175.xx.xx.82:80 forward to 192.168.1.3:80