Outline ·
[ Standard ] ·
Linear+
Unifi Official TM UniFi High Speed Broadband Thread V28, Free Upgrade In 2017
|
VeeJay
|
Jan 17 2017, 10:02 AM
|
|
QUOTE(arr9ow @ Jan 17 2017, 08:57 AM) I'm using Ookla speed test from android phone to test it out. Anyone can show me the correct way to test unifi ping rates before i make a report to TM? Thanks. Use a LAN cable to your router and test it from this website http://speedtest.tm.com.my/tmspeedtest.html
|
|
|
|
|
|
VeeJay
|
Jan 19 2017, 03:35 PM
|
|
QUOTE(annoymous1234 @ Jan 19 2017, 01:55 PM) Wait. So we need to confirm online to get the free upgrade? If not we won't get it? I dont think so. Most likely the subscriber will receive a sms/email. There are many folks who done use internet per say; where their children would have subscribed for your parents or old folks. Maybe those who confirmed via online would be expedited
|
|
|
|
|
|
VeeJay
|
Jan 19 2017, 10:22 PM
|
|
QUOTE(lyc1982 @ Jan 19 2017, 10:10 PM) PC with wifi = 21-25mbps Pc with Aztech homeplug = 7-10mbps (even worse not sure why...faulty homeplug ?)  either the homeplug is faulty or there are electrical noise in your electrical circuit. I get 28Mbps on my Aztech homeplug
|
|
|
|
|
|
VeeJay
|
Jan 20 2017, 10:22 AM
|
|
QUOTE(lyc1982 @ Jan 20 2017, 10:18 AM) i tried using my friend's Aztech homeplugs (before i purchase any homeplugs)...and it's giving me speedtest result lower than wifi Did you plug the homeplug directly to the wall or at an extension? Do plug directly to the wall and test. Both end should be directly at the wall and not on an extension
|
|
|
|
|
|
VeeJay
|
Jan 20 2017, 04:23 PM
|
|
QUOTE(Sirmacai @ Jan 20 2017, 03:53 PM) Idk the email directed me to the upgrade form page. The email should only contain, confirmation to your agreement to upgrade and end of the page it will indicate that upgrade will be done in stages from jan to june
|
|
|
|
|
|
VeeJay
|
Jan 20 2017, 06:54 PM
|
|
QUOTE(geek8585 @ Jan 20 2017, 06:17 PM) i suspect is come from electric socket... my alarm system also fried  oh another question, if i upgrade my unifi advance 50 to unifi pro 100... is there need hardware change needed? All my sensitive equipment are supplied via UPS. Get them for a peace of mind, not that expensive. I know 30Mbps to 50Mbps no equipment change needed. Not sure about 100Mbps
|
|
|
|
|
|
VeeJay
|
Jan 21 2017, 11:48 AM
|
|
QUOTE(cucubud @ Jan 20 2017, 11:33 PM) What ups capacity to buy and how much does it cost? For RM300+ you can get a 1100VA. Depending on brand some have watts rating to about 50-60% of VA Some brand names to consider are Eaton, APC, Prolink
|
|
|
|
|