Check this out, RM 1899.00 !!!!!!

The most expensive casing.........at least what i knew.........

try guess this casing price in RM......it does sell at low yat plaza now~~!!!

This post has been edited by chick: Feb 15 2007, 12:37 AM


Attached thumbnail(s)

Cuz got fata1ly name there? Btw, dis is lian li rite?

no bro,,,,it was ZALMAN

---

Added on February 15, 2007, 12:31 ami still cant imagine the price for this few pcs aluminium costed abt

RM 1899..........i'm swear to god....i asked the salesman when they build it up for display..........

This post has been edited by chick: Feb 15 2007, 12:36 AM

the price is only 899..the other 1000 is for Fatility trademark

Certain zalman stuff are definitely overpriced...
This casing is way too outrageous...If put in a 650w 0db Zalman PSU, it's enough to set up one decent AM2 X2 Rig already...

Lai lai, lelong custom side panel with "FAT-alittle" trademark for RM500 ...

what so special about this case ??

yeah..wahts so great bout this case?It looks kinda stupid and funny..and this is not the most expensive case built by zalman.

http://www.zalman.co.kr/eng/product/view.a...dx=151&code=020

this case costs 13k(back in 2004 it should be maybe 9 or 10 k now?) malaysian...i knoe!...goddamn koreans!

i wanna know too . it still works like normal casing .
The name Fatal1ty made the case pricey .
This Fatal1ty is a gamer rite ?

*yeah , he is a pro-gamer , Johnathan Fatal1ty Wendel .

This post has been edited by LWRNCH6550: Feb 15 2007, 01:12 AM

like usual brand make thing expensive... so do not buy brand....

save it for buying new hardware.. worth it. hehehe.

Wait , i've just done abit of research , this case now selling at the states for $ 120~150 , so after the convert from USD to RM , it will be RM 500+ . so , where TS got the price from ?

*btw , its not overpriced when the price ranged between 500~600 coz this casing deserved the price .

This post has been edited by LWRNCH6550: Feb 15 2007, 01:30 AM

http://www.zalman.co.kr/usa/product/view.a...dx=151&code=020

AFAIK, that zalman casing cost over usd1k , talk about expensive

wow , the case itself is a big heat sink .NOW this is when the " K " comes in the price .

funny how some godlike ex-quaker's name can jack up da price of a casing so obscenely

woww....what a unique casing
but seems a bit small~~


Chow.

a very gigantic one..like peti sejuk

Wrong place to discuss mate. This should be in Casing Modifications. And yes, it was already discussed there

Btw, for me, it looks disgusting. Even it is selling at the price of RM100 i wont buy that also....

Wait. I thought the Japanese Made Soldamns were expensive?!

wow! crimson colour led fans~~ cool!!!!!

so any1 know the actual price...??

i think the use the wrong conversion, pound instead of dollar

check Computer Power User Mac07 issue, got comparison of high end casing. but didn't even include any of the silverstone or Lian Li casing...

anyway, this zalman casing slapped with FAT-ONE-TY surely way overpriced if sell at RM1.8k+

This post has been edited by toughnut: Feb 15 2007, 07:46 AM

Give that cash to ianho, I bet he can mod a better casing than this...

But seriously, that's a huge price to pay for a casing.

This post has been edited by edministrator: Feb 15 2007, 09:43 AM

For that kind of price, better get Lian Li casing...

if the casing come with fatality part then the price is worth d...


the is the woorld 1st fan 0 design casing in the case .. the casing mayb can beat all the 3rd PT hsf in the market.. both of the casing side panel was for u realease hot... but this casing start sell at few year ago. i remember dunno read from which taiwan PC mag

no ure wrong, the price is around 250 pounds = RM1.7k (in UK) or US$370 (in US) = RM1.3k, http://www.newegg.com/Product/Product.asp?...N82E16811235004

this case is a rip off, it just looks like a modded centurion or something only slapped with Fatality logo, which is crap.

i'd buy one if it was around 500 bucks, pretty decent casing nonetheless.

This post has been edited by Xonius: Feb 15 2007, 12:13 PM

Heh, I either use an RM70 casing cap ayam or no casing at all... this is just a rip off. but if you have money to spare......

http://www.hardwaresecrets.com/article/376/2
below the title shows various price range from amazon and tigerdirect .

i agree , this case is a total rip off like most people think , it has a plain look from inside out . its much better to get some RM 300~500 case at half of the price and smack the remaining cash into RAMs .

yea me 2 what so special about this casing only a PRO-Gamer name on it and it cause that much ?. For me i'm getting my self a raidmax or lian li casing better then this stupid piece of junk . The Creator of this casing is korea peopel ? tat make no sense korea should be genius dude -.-" who make this casing disappointed me

because of the fatal1ty then the casing will worht more than 1k lo,the word worth 1 k,hehe....i'll go and cut a piece from sticker shop and put on my i-cute and i sell rm500 as i-cute gamer choice fatal1ty....

If i'm going to setup new RIG i wont buy this casing..I go for performance then the appearance...

For me it is not worth the money lah...Just a FATALITY brand make it expensive...

I would go for the less expensive like thermaltake casing...

here are the link...

Thermaltake Armor

This post has been edited by funkyboy4ever: Feb 15 2007, 12:35 PM

yeah...just because its using Jonathan's name,"fatality"...the casing worth more than others...but,nice casing n logo for fatality...

really not worth it for this kind of casing i better buy a cheaper brand than pay rm 1+++ for just for a casing where i can buy a processor and vga

our own lyn pimped rigs are anytime looking prettier than that one .. imo.

Oh mama!! A casing cost 1900!?!??!?!?! almost a set of computer price lo, omg~

U guys shud look beyond the Fatality branding. It's actually a really well built case. Really nice thick aluminum n superb construction. Looks nice too. The problem is, they've made it look to cartoonish with all those engravings n branding everywhere. If they made a plain black Zalman branded version it wud b really lovely.







What u guys fail to understand is that the ppl who buy stuff like that own rm19000 rigs. So, a guy who owns a rm2000 rig spends 10% on his case meaning a rm200 case. The fella with rm19000 rig spend 10% on case is also no big deal.

Different products for different markets mar.

This post has been edited by ianho: Feb 15 2007, 06:37 PM

too costly for casing with that price.the design also not very attractive.
maybe the it use good material.thats why so expensive

THE GOD OF THE MODS HAS SPOKEN!!!
LET THERE BE NO MORE WORDS!!!

Just jokin'

This post has been edited by sHawTY: Feb 15 2007, 07:00 PM

look at the bright side .. it has wheels ...lol..

i rather save the money and get a better gc or proc ...

Yea gotta agree with ianho...different target market..
I see a lots of wording at the back of the case..wonder wat the wording is for?

This post has been edited by kerryking: Feb 15 2007, 11:45 PM

my casing looks better than that

better i get a armor casing, even it isn't a aluminium casing........

You're talking about thermaltake armor?

Thermaltake?
Euughhh...

i think jap's soldam is stil the expensive case all da way

definitely overpriced and the design oso looks normal, i rather spent not even 1/3 of tht price to buy cooler master stacker STC-01, although it is heavy and non-alu, but its very good for those need spaces inside a casing, can fit water cooling kits wif 3 or 2 fans radiators sommore..

Ahh... but they're bespoke.

The Fatality's just obsenely unreasonably expensive

My God at that price can buy an entire rig man! Gila! Almost 1/2 of my present budget for my new rig! Gila Gila ! Better use the $ to buy a damn good card!

Anyway my personal opinion!

klguy

that's what they call marketing strategy ...

using the superior well known brand name and sell the product at very high price to attract luxury buyer ...not for general people like we all ...

hurmm.. the casing itself costs about only rm1000+- IMO.. and the rest for the brand.. can get an amd x2 rig with this amount of money.. or juz buy a chapalang casing and ask uncle ianho to mod it.. much much better.. hehe..

-adios-

hahaha, just like ianho said la, anybody who owns a RM20,000 rig for surely will find a case that goes with the price RM2000 for the case it's like nothing to them

Yup true! I got one kiasu VIP son who had a RM15000 rig set up for him but I think he kena con kau kau lah coz the system doesn't look max specs for a RM15,000 rig. Donno whcih shop untung kau kau from his rig!

Anyway this is a personal opinion!

klguy

agree to uncle ianho

diff ppl diff budget

which shop selling this casing, can't find it.

This post has been edited by SEP910: Mar 1 2007, 03:24 PM

Quite true as I spoke to one of my dutch colleagues and that for them spending around 3000 - 4000 euros (RM12k - RM16k) on a computer is quite normals to them a case like that would cost around 500euros which is a little higher than usual.