huh wat spot is tat? G-spot?

hehe. i try to adjust all the equalizer bt cant seem to find a good one. so left it at flat. n turn on the crystalizer. sound ok for me on mp3 files.

Crytalizer only works well for low bit rate MP3 and entry level speaker...

ha ha u r rite. lst time tried wif sonic gear tatoo. the chepest one.. sounds better thn on board audio ... lol

Who say bling bling not nice

check my work station.... can always look at my bling bling x-fi haha

nice workplace.. i wish mine was like that.

you should change your speakers and get the best out of elitepro, then you will focus more on your audio/speakers instead of looking at your soundcard..

This post has been edited by blessedvillain: Apr 25 2008, 08:25 AM

i think he is selling now...VS4121 + ElitePro, WTF...

This post has been edited by coolkwc: Apr 25 2008, 09:26 AM

LOL'd..coolkwc...ur avatar...

no others meaning...just 'Tak Nak Sound Pollution', lol... Maybe later i change to another 'down firing midrange speaker', i think you know the candidates

This post has been edited by coolkwc: Apr 25 2008, 11:18 AM

Ahhhahaha...i like ur avatar coolkwc hahaha
Selling and also hunting for a 5.1

Lol, don't be so harsh on 4121's user la, bro


Anyway, i got my X-Fi XtremeMusic(SB0460) modded with 1 x LM4562 + 3 x 1000uF Pana FM power filtering capacitors, the SQ never let me down though

At first i soldered 2200uF 16v Pana FM cap as the main power filtering and my card wasn't detected, then i tried 2200uF 25v Pana FM, same thing happened...

After that i saw a post in Head-Fi forum saying that the power regulator on SB0460 doesn't allow low-ESR power cap to be used and cut off the circuit on the board, in the end i tried 1000uF then everything is perfect

Power Filtering Cap
Jamicon 220uF/16v ---> Pana FM 1000uF/16v
Jamicon 100uF/16v ---> Pana FM 1000uF/16v X 2

Operational Amplifier
4556A ---> LM4562MA

Almost fainted when my SC wasn't detected after trying the 2200uF/16v & 2200uF/25v

Well done, although there are more mods you can do to improve it

But you said 3x1000uF caps? That is a lot, considering there is only one caps for the DSP. What are the other two for?

My hands were numb after the mod since my soldering skill isn't that great
Will try to mod the decoupling caps after i got bored with the current sound quality

1 x 1000uF is for replacing the main power filtering cap...
The other 2 is just replacing the smaller value power filtering cap i guess since there're 2 x 100uF/16v power cap on the card...
Not so sure if both of the 100uF/16v caps is the power cap or not, please enlighten me...

I will try to post some pic if im able to... My friend also got his SB Audigy2ZS modded with 1 x 2200uF/16v + 2 x 1000uF/16v (Pana FM) and also LM4562MA opamp...

This post has been edited by UNDERGROUND: Apr 25 2008, 03:10 PM

Where are those 2x100uF caps located?

For the signal decoupling caps, you can remove and short them, it's not needed. If you concern get the same value but with higher grade like the your Pana FM's (BTW where you get these caps?)

There are other mods you should try, but only if you wanted more. I have the all the mods that you can possibly do

Both of them between the port and XFi chip, 1 near the port and the other 1 near the chip while the main power cap on the other end of the chip...

I will try to get some pic ASAP

Got my caps from FARNELL, bank-in and then it was shipped.

This post has been edited by UNDERGROUND: Apr 25 2008, 03:19 PM

I see...I don't get where it located, do you mind see the number on the caps (e.g C77)? A picture might help

wao, great to see another XtremeMusic modder...

How about you? Where's your mod ?

not yet...

This post has been edited by coolkwc: Apr 25 2008, 04:58 PM