My 1st Master grade gundam... Gundam Wing Ver.Ka
Well i took almost three days to finish it because slacking half way
**Please take note that i have modified the wing so it can spread open... Looks nicer of cause
Tutorial with picture can be given if anyone ask from me^^



I'm quite satisfy with it since i got some tutorial from the internet about adding detail to it...
It is a quite 'short' unit as i compared it with my 1/100 Gundam 00 Dynames(about 2cm difference!!)

lol lol lol....

This post has been edited by edwardgsk: Apr 11 2008, 01:21 AM

>>MyKy44 : Fragile you said? Wahaha let me inform u something... actually the wing gundam has dropped once on the table cuz i used wrong stand clipper size haha and it brings no damage on it... 'Luckily'.. well i also used Mr. Cement to stick some parts of the wing cuz when i seperate it there are some parts where it cant be joined back to the other parts of the wing (see below)




Look at the joint of the top and the bottom parts... it's totally seperated and no connector right? at this time, modeling cement will be useful

---

Added on April 11, 2008, 2:11 pmerr, may i kno what u do to make the unicorn's red inner frame becomes pink? u use colour or air brush or? and also may i know how to do it?

---

Added on April 11, 2008, 3:04 pmWell i heard from some people that the red caution sign sticker will leave a yellow spot on the kit after a few months... is that true and do anyone have ways to avoid it?

This post has been edited by edwardgsk: Apr 11 2008, 03:04 PM

lol ur exia looks wierd ^^;

A new start for MG freedom which i bought last two week and i just started with it this evening because of exam and finally finish sanding with the blue colour parts... as well as the white part for the gun because those idiots in bandai who were trying to save kit-making cost use blue sticker on the gun instead of blue plastic parts... going to start blue spray tomorrow. no priming through but top coat will be on...



...and for those who have experience in freedom are all welcome to give comments and tips on freedom.... any kind of tips will be fine with me (NO KIT-DAMAGING TIPS PLEASE!)...

lol, bandai produced another f**k*p product again.... see this



what the hell is that line!? its the holder of MG freedom's gun(the secondary holder which can rotate) lol that makes people need to do more work with sanding only... HELL!!! Cant they produce a better quality product??

lol hell that! it makes a lot of work and thats not the only one part with the problem.... those parts especially white colour parts have the problem!!! reputation dropped for bandai...

i know the fact now and sanding it now... lol lebih de... like that i think it will takes me 1 week to finish the whole thing lor...

troubling flesh and need to sand it till bleed!!!

lol lot job to do with it.... kinda tired of sanding now...

christwoo>> ur unicorn's red frame looks pinkish and bright enuf! did u apply a layer of metallic silver inside the red parts so it could reflect light out?

Here's my current process for MG Freedom...

I have detached all the parts and separate them into plastic labeled with the skeleton's alphabet... only F1,F2 is completely sand E1, E2 still in sanding progress the rest waiting to be sand...


any comment are welcome ... modify tips are welcome as well

---

Added on May 17, 2008, 7:24 pmnew progress update:
Parts H(ABS) have been completely sand.

---

Added on May 17, 2008, 7:35 pmnew progress update:
Parts E1, E2 has been completely sand.

---

Added on May 17, 2008, 10:20 pmnew progress update:
Parts B1, B2 has been completely sand.

This post has been edited by edwardgsk: May 17 2008, 10:20 PM

MG Freedom new progress update:



Parts I, D, J, F1, F2, G have been completely sand.
Still left A and C.... lol tired

0300078>> hei the gattling gun only comes with the novel or can buy the gattling gun only? bout the mod, i would like to see it and i can read japanese... can scan and send me the pages?

edan1979>> love ur unicorn^^ i gt one set but building MG freedom now instead of building it...


still remain untouch... plan to build it on the end year holiday

wow ur colour variation SF is cool. a perfectly yet shining yellow gold! may i know what gold u are using?

tisuepaper>> great. how long u take to finish F91? no paint work i presume?

Guys my MG Freedom update progress:

i start off with paint works on the ABS parts (inner skeleton frame of freedom) with Tamiya Acrylic X-10 Gun Metal colour...

My MG Freedom progress update:

Finally finish assemble the legs' skeletons... i compared it with an original without paint product that comes frm internet and i WOW! so much difference! one looks like made of metal while the other one looks like plastic toy!!

Here's some picture of the progress

My MG Freedom progress update:

Haha finally done with the arm amour parts... i use tamiya acrylic flat white + a few drops of tamiya acrylic gun metal + zippo... the surface looks kinda rough to me ... is there any way to smoothen it ...



And so after the arms joined to the rest of the skeleton ....



finally it can hold the beam gun and the shield

---

Added on May 25, 2008, 9:11 pmlol one of my friend told me it looks like a terminator haha...

This post has been edited by edwardgsk: May 25 2008, 09:11 PM


Attached thumbnail(s)

wah... really 'custom' sia....

nowander chris is called as resin/conversion kaya-raya throne in kopitiam thread la... really pro in resin conversion sia...

lol chriswoo, yours is infinite justice not justice le.... but i like the spray work done... very neat

---

Added on May 31, 2008, 10:06 pmchriswoo, what paint u use for all the joints of the infinite justice? does the paint chipped off when u move the joint part?

This post has been edited by edwardgsk: May 31 2008, 10:06 PM