Finally done it !! So tired , first time detail car until 1am , the Soft99 Fusso really eat up my time , it just like take twice of my time compared to Meg ultimate liquiq wax 
This is what i prepared 

[attachmentid=8520674]
so prepare two bucket , microfiber mitt Meguairs for top wash , cheapo giant microfiber mitt for lower part , sponge for wash rim and tyre , ready clay bar , spray bottle and can clay after wash

[attachmentid=8520685]
So why do we need clay? see after i give a good wash , there sure have some dirt that can't be wash off on surface , that why we need to clay  Can see it?

[attachmentid=8520687]
[attachmentid=8520689]
Start clay with shampoo and can see so many dirt stuck on the clay even after a clean wash

[attachmentid=8520690]
[attachmentid=8520691]

And the dirt has gone 

[attachmentid=8520696]
So what i have done today , Clay , Compound all window , Soft99 Fusso Coat whole body paint part , Meg Ultimate Liquiq Wax for chrome and lamp part, Soft 99 Side Mirror Coat and Ultra Glaco all window , tomorrow only do the wheel dust block , it's too late already 

About the interior, wait after i get install tint and carpet only do

[attachmentid=8520704]

do you have any clear picture of the said ring?

Unfortunately..

Lighter colours dont really photograph well..

Why do u say Soft 99 fusso takes longer??

Very rajin.  Does Fusso Coat coat the black plastic parts well or you did not apply to those parts as most waxes will cause white overun marks on black rough plastic bits?  Normally, from a glance you can tell cars that have been SiO2 coated by just looking at the black plastic bits.  The SiO2 coated ones are really black!

The Honda service centre asked me to make a defect report with Honda (M) and I did that last year. But seem like this still happening to new cars.. so I guess Honda (M) not give a damn about this defect

Because it is he paste wax that u cant let stay longer, u apply at 1 panel, then wait 5-10 min have to wipe off, and it really not easy to buff off seriously, if u let it dry more time, it even hard to buff , while using meg liquiq wax, i can just apply to whole car, and just buff off so easily, the liquiq wax can stay no matter how long also easy to buff

I really hope soft 99 can last longer, its not fun to reapply every 3 month , end up i will used back liquiq wax if the soft99 fusso not long lasting

But in term of licin, fusso soft99 win hand down

This is in Honda website:

https://www.honda.com.my/corporate/press_re...lers-Nationwide
Scroll below for specs.

Apparently the Ray Barrier Premier 6 is exclusive to Honda and is not in Ecotint Website. Specs are quite similar to Ray Barrier Pre-Eminent & Protection which is in Ecotint website.

By the way, i am no expert on this. But as a user I can say it definitely feels better than my friends 3M.

Any1 can share the current discount for 1.8s? Going to book the car on sunday dy~

guys, can i know where can i do the bypass for e-brake? for the purpose of mirroring my iphone via hdmi (using Waze) or watching videos from USB drive while driving... how much will it cost me? is anyone here has done this? can i know your feedback?

Can't see the actual specs. Is it on the website that u provided?

And saying its better than 3M is too general. 3M is the brand name which has about 15 different types of tint with varying specs.

I got 5.7k from kah motors

You need to scroll down on that Honda page as i have mentioned. Need to do a bit of work la friend Anyway i copied and attached here.

My Civic TC is September and my friends 1.8 is October. Both Modern Steel.  I did my Ecotint with Honda Melaka and he did 3M in his friends accessory shop in KL at almost same price. We swap cars for a few days. I felt the difference when parked under hot sun and my friends agrees too. As for specs and other stuff, i am afraid you need to do your homework Bro. I am merely sharing my experience, it is suppose to be general. Cheers![attachmentid=8522563]

your friend not using 3m crystalline?

I am not sure if he is using Crystaline  . I know he paid around RM2.8k just like me so I am assuming that his money should be able to buy him a better product from the outside compared to me buying directly from Honda as everything is normally more expensive from Honda 

time for version 5

or he could be using non-genuine tint by dishonest seller.