Lousy for me. Finger need 100% dry for the fingerprint scan to work properly. While cheaper phone can perform better. For RM4k phone of course i expect the scanner can tolerate if finger a bit wet. Sometime when i want to use phone quickly out of pocket need to wipe finger 1st 

Lousy for me. Finger need 100% dry for the fingerprint scan to work properly. While cheaper phone can perform better. For RM4k phone of course i expect the scanner can tolerate if finger a bit wet. Sometime when i want to use phone quickly out of pocket need to wipe finger 1st 

borrow my friend's oneplus 3 this morning and try the fingerprint sensor with wet finger (maybe i should say moist finger).. it failed just like my ip7+... even i ask him to try the same situation on both phone and it failed too.. but never try with other phone yet..

i'm using home button sticker for my 7+ works fine for me most of the time, and as bro andrewtst said, if fingers are wet the home button won't function properly. this issue will not happen on my ex mate 9 phone. guess apple cut cost use lesser quality hardware this time round?

just now i tried the fp sensor on my asus zenfone 3 max using wet/moist fingertip and it can unlock the phone after second or third attempts... but when i'm using the same amount of water/moist, tested on my ip7+ and it failed.. imho, i can agree with others that fp sensor on ip7 is not very good when it comes to wet/moist/oily fingertip..

Lousy for me. Finger need 100% dry for the fingerprint scan to work properly. While cheaper phone can perform better. For RM4k phone of course i expect the scanner can tolerate if finger a bit wet. Sometime when i want to use phone quickly out of pocket need to wipe finger 1st 

Just wanna share a bit, bought this lighting + 3.5mm headphone jack adapter from Benks. Works great, can charge and use headphones at the same time. It's very small too, but smaller than I expected. Works great, very happy with my purchase.
Btw if anyone interested I can bring in some for sale

I observed this, not sure same conditions and scenario like you. When "over-charging", leaving it with the bundled apple adaptor and connected after it reaches 100%, the phone gets warm/hot, the fingerprint doesn't register.
Since then, I got an Anker USB charger which can do fast charging like iPad charger, 2.4A?? charge within 1 - 2 hour (never really check how long it charges, but should be below 2 hours and above 1 hour mark) and unplug before it gets warm.

Avoided charging overnight and no longer using the Apple bundled charging adaptor.

Lousy for me. Finger need 100% dry for the fingerprint scan to work properly. While cheaper phone can perform better. For RM4k phone of course i expect the scanner can tolerate if finger a bit wet. Sometime when i want to use phone quickly out of pocket need to wipe finger 1st 

How much would this cost??

It's around RM60. Quite worth the money to be honest, solve the headphone jack problem at least. And it's small and compact, easy to carry around   

My question is will it affect the Charging time? If using these splitter or will my audio from earpiece gets softer in volume while using and charging?

Haven't really test charging time. So far I tested audio still the same.
I don't normally charge and listen to music at the same time. So this adapter is mainly for me to connect my earphones. I don't like the stock adapter that comes with the phone, prefer something like this hehe.

It's around RM60. Quite worth the money to be honest, solve the headphone jack problem at least. And it's small and compact, easy to carry around   

I see. Haha I think the stock adapter is too flimsy I think it will break in no time haha

Just wanna share a bit, bought this lighting + 3.5mm headphone jack adapter from Benks. Works great, can charge and use headphones at the same time. It's very small too, but smaller than I expected. Works great, very happy with my purchase.
Btw if anyone interested I can bring in some for sale

Screw this. Airpods ftw hahahah