no.. i noticed a swiftech GT wb, CM rad and .....

who is tolorati ? RM100 for sleeving

where got.. its a heatkiller 3.0 , a Feser 120 rad.. and a MCP355 with a EK-DDC top

---

Added on February 2, 2010, 3:15 pmbeli bnyk2 sleeve >>

im gonna buy 100m.. lilit satu padang ahahha

This post has been edited by reiben05: Feb 2 2010, 03:15 PM

hahahah reiben... it's really like a joke of the day

bro, the tool that i use does not even cost RM0.10..

i just use 1 staple bullet only.

balance buat rasta headpiece hehehe....

---

Added on February 2, 2010, 11:24 pm1 staple bullet..?? no kidding...which one was it, the normal or the heavy duty one..? this really gotto try..

This post has been edited by vladtheimpaler: Feb 2 2010, 11:24 PM

i use the bigger size one, which also so happen to be thicker and heavier duty..

just make it into a "п" shape... use needle nose plier to bend it..

no, it's not kidding.. i really saw before it's one of the method to dissemble the molex, but it ain't easy to do.. need a lot of patience through the process. i've tried it before.. it's damn hard to do that

not exactly, i can pull one cable out in in seconds. of course there are those that sometimes are hard. if anyone wanna know the instruction can pm me. otherwise you can pay clawhammer to do it for you.

maybe i need a proper easy learning from you... mind to teach me sifu..

---

Added on February 3, 2010, 2:33 ambut i already got the tools.. hahahahhaha

This post has been edited by kInOzAwA: Feb 3 2010, 02:33 AM

tolorati seems to be an expert now As for me, I use a tiny screw driver to poke inside and twist to get the cables out. Molex connectors are a lot easier though.

huuu.. need help. i think my water cooling loop is developing minerals or algae.



see that, the tube is clear type. now so cloudy... any suggestion how to avoid this? or is it normal? i bought some biocide. haven't try it yet. is it recommended i put it in?

what brand of biocide?? need to read its description first
usually people at the states refer them as ptnuke, 2 drops in it can keep ur water inside free from algae and livings things for years

what are those white cloudy stuff anyway?

where can i get the ptnuke?

can ask mr. Joe aka vladtheimpaler... he can bring wonder...

don't know what the white stuff are yet. any ideas guys? wait i check what's the biocide brand

clouded tubings are common back in the days all people use transparent tubings....

use biocide will reduce it, but it will still happen... and last time the clearflex tubing often cloud up very fast... even using distilled water, u will also have the problem, swiftech coolant make it worst after u drain the loop, the whole tubing will be clouded.

use biocide or coloured tubing lo..

its not algae, but i not sure what issit, but it wont clog up ur block. if u see black or green, den its algae...

if not algae then must me minerals. but where does it come from? coolant + radiator material?

good news it won't clog up the system i was just afraid the pump/radiator might get clogged up or something

from what i experience, coolant with ethylene glycol will form cloudy faster compare distill water of battery water...

I have it too using distilled water + anti-algae. Not as bad as in the picture though. the first I also thought algae so I took everything apart and cleaned it up (twice) and the third time still happening although I put a sh*t load of anti-algae.

This time I left it to see how it would evolved. After a while it seems to have settled (it's not becoming worse). It is definitely not algae because my reservoir stay completely clear. I guess it is because the tubing is porous some minerals sticks to it. I'd like to know where it comes from though as the distilled water supposed to be 0% minerals. Maybe some flux left from the radiator ...

Anyways, next time I take my loop apart, I'll buy colored tubing. No point on sticking with clear tubing if it only stays clear for 2 weeks ...