Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 AMD Radeon™ Discussion V15, Radeon Software 20.10.1

views
     
HerbalTea
post Sep 6 2019, 05:38 PM

Getting Started
**
Junior Member
56 posts

Joined: Jun 2011
From: FL 030


I'm using rx 5700xt reference / sapphire pulse xt

Never had soo much headache before. Used a rx580 before this and I never had this much bsod/crashes/laggy chrome video playback

Thought I had a bad gpu. Sold off the reference card at a loss. Bought a brand new sapphire pulse xt. Same issue. Did a ddu format etc etc.

Figured it was a driver issue. Tried 19.7.5 and it has been rock solid

TL:DR - amd drivers are crap. If you're using rx5700 xt. Do yourself a favor and just stay at 19.7.5
HerbalTea
post Sep 6 2019, 09:36 PM

Getting Started
**
Junior Member
56 posts

Joined: Jun 2011
From: FL 030


QUOTE(chocobo7779 @ Sep 6 2019, 07:32 PM)
Did you disable hardware acceleration?  Mine is working perfectly on 19.8.1 - even 8K30 YouTube videos worked perfectly on Chrome icon_idea.gif
*
yeah did everything. hardware acceleration/free sync/enhance sync/ you name it, I've done it. Was still crashing. 19.7.5 is rock solid right now.

I'll try 19.8.1 later

Browsed reddit and I'm not the only one getting these issues. Consensus says 19.7.5 is the safe bet for now

I never had this much headache before I was using rx580. Then again its a 2 year old model so drivers had time to mature.

All in all the 5700xt is a wonderful card when it works
HerbalTea
post Sep 13 2019, 10:39 PM

Getting Started
**
Junior Member
56 posts

Joined: Jun 2011
From: FL 030


19.9.2 has been released. Looks like amd fixed most of the 5000 series issues. Running stable so far
HerbalTea
post Sep 26 2019, 08:56 PM

Getting Started
**
Junior Member
56 posts

Joined: Jun 2011
From: FL 030


QUOTE(noobianz @ Sep 26 2019, 08:39 PM)
My gpu can barely breath with this casing. Prior to this i've used reference Rx 5700 xt, but the temperature is quite bad unless i undervolt it to 1050mv and 1850mhz target clock but still need to have the fan run @2600rpm for decent temp (80s edge, 100s junction)

[attachmentid=10320399]
*
...theres hardly any gap between the psu shroud and gpu fan rclxub.gif

 

Change to:
| Lo-Fi Version
0.0774sec    0.78    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 12:33 PM